ClubSport Pedals V3 inverted

Pure realism

Realism to the max - that's the ideology of these inverted pedals. Pivot points, arrangement, distances and overall feeling, just like in a real car!

Inverted clutch and brake

The clutch and brake pivot points are inverted to the upper side of the pedals, attached to a very solid frame, just like you would expect from the Fanatec ClubSport Series. The longer pedal travels and the pedal distances are inspired by real cars in every detail.

Brake pedal equipped with damper (adjustable)

These pedals come equipped with a resistance-adjustable ClubSport Damper Kit, mounted and ready-to-use on the brake pedal. In combination with the toolless adjustment of the brake resistance (as in the V3 pedals) these pedals delivers pure realism right out-of-the-box!

Proven Design

Full metal construcion with cutting-edge features, already demonstrated by the the ClubSport Pedals V3 and it's predecessors.

Maximum Adjustability

Thus the premounted setup delivers a max realistic feeling, the variety of possible arrangements via the pedal extensions and the swappable D-shape pedal plates allows you to fit your racing style and ergonomics.

Vibration Feedback Pedals

The new vibration motor on the gas pedal can be used by games to indicate if you lose grip and should let up on the gas. The second motor on the brake can warn you if you brake too hard and lock the tires or the ABS sets in.

Advanced Technology

Nothing will make you faster than a set of great pedals! Therefore we are using the latest and most advanced technology to give you the advantage.

90 kg Load Cell (adjustable)

The custom-made load cell is extremely durable and much more precise than the one used in the V2. You can apply realistic, strong pressure and precisely control the brake with muscle tension just like in a real car.

Contactless Hall Sensors with 12 bit resolution

The electronics have been completely revised and the magnetic hall-sensors of the gas and clutch use 4x the resolution of the previous V2 pedals. Each axis can be calibrated in the wheel or in the driver.

Features

Turning points of brake and clutch on top side like in real cars
High resolution pedals with magnetic and contactless sensors on gas and clutch for a long life and maximum performance
Pressure sensitive brake with custom made 90 kg load cell sensor
Adjustable brake stiffness and travel without tools
12bit resolution (4096 values) on all axis
Alternative D-shape race plates in curved design
Pedal extension to adjust the angle of the pedal plate and to change the angle of the whole pedal arm
Brake sensitivity can be adjusted through the tuning menu of the wheel and during the race
Vibration motor on throttle pedal indicates rear wheel spin and oversteer (control by games is possible via Fanatec Wheel SDK)
Vibration motor on brake pedal to simulate ABS and indicate locking tires (controlled by Fanatec wheels: Compatible to all games. Dynamic control by games is possible via Fanatec Wheel SDK)
Design of the gas pedal allows quick exchange of the springs. Two springs with different strength are included
Damper Kit assembled out-of-box at brake, optional damper kit for gas sold separately. The hyraulic dampening resistance can easily be adjusted with a knob
Full multi platform compatibility, depending solely on the platform compatibilities of the connected Wheel Base/Racing Wheel
Full metal construction of CNC-machined aluminum
Ultimate adjustability: Position of pedal plates in all directions, angle, spring strength at throttle, brake sensitivity, brake travel
Compatible to the colour kits to allow perfect optial customisation (Note: colour kit footrest is shorter than standard V3i footrest!)

Compatibility

Peripherals:

Compatible to any Fanatec Wheel Base or Fanatec Racing Wheel with RJ12 Pedals connector. To connect Fanatec Wheels with PS/2 Pedal Socket, you need the additional PS/2 to RJ12 cable.
Compatible to ClubSport Pedals V3 Brake Performance Kit
Compatible to ClubSport Pedals V3 Damper Kit (Throttle Pedal)
Dedicated plug for the ClubSport Handbrake
The pedals are not compatible to the ClubSport USB Adapter. Please use the included USB connector (PC only).

Platforms:

PC:
- If you connect it to a Fanatec Wheel Base / Racing Wheel it will be compatible to all racing games. For that case, please check the compatibility details on the product page of the connected product.
- It will work with any racing wheel, also of any other brand (Logitech, Thrustmaster, etc), if the pedals are connected to PC via USB and if the game supports a second controller. E.g. these PC games support a second USB controller:
  - iRacing
  - Assetto Corsa
  - Project Cars
  - GTR 2
  - Race 07
  - rFactor
  - Live for Speed
  - ...and many others
Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Please check the information on the product page of the Fanatec product through which they will be connected to the console. It will not work on consoles using the direct USB Connection or a ClubSport USB Adapter.

Special Notes

Please note that the vibration function on gas and brake is not supported by all games. On PC it can be implemented with plug ins to our driver / third party software if the games sends the telemetry data.
Max resolution depending on the connection:
- through PWT / PWTS / CSR / CSR Elite wheel: 8 bit (256 values) on all axes
- through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E RW PS4: 12 bit (4096 values) on all axes
- USB direct connection (PC): 12 bit (4096 values) on all axes

Packaging Details

Size (L x W x H) : 50.00cm x 40.00cm x 34.00cm
Weight: 11.48kg
Volume weight: 13.60kg

What's included

ClubSport Pedals V3 inverted
ClubSport Pedals V3i Damper Kit (assembled at brake)
3x Pedal Extensions (2x assembled, 1x accessory)
3x D-shape pedal plates incl. mounting screws
1x Strong spring throttle
2x Stabilizer feet incl. mounting screws
1x RJ12 connection cable (150cm)
1x USB connection cable (180cm)
1x Allen Key for damper
1x Lithium grease bottle
1x Quick Guide

Model name of pedals
Clubsport Pedals V3
Clubsport Pedals V3 Inverted
CSL Elite Pedals LC
CSL Elite Pedals

Code
CSP V3
CSP V3i
CSL EPLC
CSL EP

Compatibilty
All wheel bases and racing wheels
All wheel bases and racing wheels
All wheel bases and racing wheels
All wheel bases and racing wheels

Features

Material
CNC machined Aluminium
CNC machined Aluminium
Diecast Aluminium
Diecast Aluminium

Load Cell Brake
Yes
Yes
Yes
No

Adjustable brake sensitivity
Yes
Yes
Yes
No

Clutch Pedal
Yes
Yes
Yes
No

Degressive Clutch
Yes
Yes
No
No

ABS Brake Vibration
Yes
Yes
No
No

Throttle Vibration
Yes
Yes
No
No

Damper
Optional
Brake pedal
No
No

Horizontal Adjustability of Pedals
Yes
Yes
Yes
Yes

Vertical Adjustability of Pedals
Yes
Yes
No
No

Adjustable Pedal Angle
Yes
Yes
No
No

Modular - Ability remove from base
No
No
Yes
Yes

Changeable pedal pads
D-shaped/anodized aluminium
D-shaped/anodized aluminium
Rubber/aluminium/anti-skid
Rubber/aluminium/anti-skid

Sensors
Loadcell/Contacless magnetic
Loadcell/Contacless magnetic
Loadcell/Potentiometer
Potentiometer

Adjustable spring strength
Throttle/Clutch
Throttle/Clutch
No
No

Adjustable brake stiffness and travel
Yes
Yes
Yes
No

Ability to hardmount pedals
4-hole pattern
4-hole pattern
2-hole pattern for heelrest plus 2-hole pattern for each pedal unit
2-hole pattern for heelrest plus 2-hole pattern for each pedal unit

USB connectivity (PC)
Direct
Direct
Direct
optional adapter

Max bits of resolution (values)
12 (4096) on all axes
12 (4096) on all axes
16 (65536) on brake / 12 (4096) on throttle and clutch
12 (4096) on all axes

Optional Parts / Kits

Damper Kit
Throttle/Brake
Throttle
No
No

Brake Performance Kit
Yes
Yes
No
No

Color Kit
Yes
Yes (shorter heelrest)
No
No

02/2017

Downloads

Information

Driver (for PC)

The Fanatec wheel driver will also support these pedals. Please check and download the driver for your Fanatec wheel. If you do not have a Fanatec wheel please install the driver listed on the left side.

Please connect the Pedals either to the wheel by RJ12 cable or by USB directly. Do not use both connections at the same time! On consoles you will have to plug the pedals into the wheel.

Brake

The pressure sensitive load cell brake on these pedals works completely different to potentiometer pedals. With the feature "BrF" (Brakeforce) within the wheel tuning menu, you can adjust how much pedal pressure is needed to have full brake power in the software. You get used to the feeling very fast and soon you benefit from the advantages over “normal” brake sensors.

If you think your pedals do not work like expected, please connect them by USB to a PC if possible and check the functions this way. Please also check the cable connections.

Drilling template - additional information:

When printing the Drilling Template at home, please make sure that the print size is 100% (file size = print size). Therefore deactivate "automatic page scaling" in the print dialog for example.
Before drilling the holes, please check if the hole marks on your printed Drilling Template fit to the screw holes of your pedals.