MANUAL | QUICK START GUIDE

Podium Hub

p_hub_pure-01

PACKAGE CONTENT

P_HUB-QSG_FW_Package_Content

a - 1x Podium Hub
b - 1x QR2 Wheel-Side
c - 1x 2 mm Allen key
d - 1x 4 mm Allen key

FIRMWARE UPDATE

P_HUB-QSG_FW_Update_1

1 - Download and install the latest Fanatec driver ( https://www.fanatec.com/s/download-apps-driver ).

2 - Connect your wheel base to PC via USB; make sure your wheel base is in PC mode.

3 - Open the Fanatec Control Panel.

P_HUB-QSG_FW_Update_2

4 - Connect your Podium Hub to your wheel base.

5 - Click on "UPDATE" in the Firmware Manager.

CONNECTIONS

P_HUB-QSG_Connections

NOTE: Do not connect the "DataPort-C" to a PC or console. DataPort-C only connects to the Podium Button Module Endurance and Podium Button Module Rally.

PADDLE SHIFTER ATTACHMENT

P_HUB-QSG_Paddle_Shifter_Attachment_1

1 - Remove the bolts with the included Allen key and remove the front cover.

P_HUB-QSG_Paddle_Shifter_Attachment_2

2 - Attach the paddle shifters.

P_HUB-QSG_Paddle_Shifter_Attachment_3

3 - Connect the paddle shifter cables to the highlighted sockets.

P_HUB-QSG_Paddle_Shifter_Attachment_4_n

4 - Arrange the cables carefully before closing the housing. Re-attach the cover and tighten the three bolts.

CLUBSPORT BUTTON CLUSTER PACK + RIM ATTACHMENT

P_HUB-QSG_CS_BCC_+_Rim_Attachment_1

1 - Remove the bolts with the included Allen key and remove the front cover.

P_HUB-QSG_CS_BCC_+_Rim_Attachment_2

2 - Connect the ClubSport Button Cluster Pack cables to the highlighted sockets.

P_HUB-QSG_CS_BCC_+_Rim_Attachment_3

3 - Arrange the cables carefully before closing the housing. Re-attach the cover and tighten the three bolts.

P_HUB-QSG_CS_BCC_+_Rim_Attachment_4

4 - Place the washers of the ClubSport Button Cluster Pack on the holes where no Button Clusters will be mounted.

Place the wheel rim on top of the washers and align the wheel rim with the mounting holes of the Podium hub.

Insert all bolts except the two for the Button Clusters. Do not tighten the bolts yet.

P_HUB-QSG_CS_BCC_+_Rim_Attachment_5

5 - Slide the Button Clusters in place, insert and fasten the remaining bolts.
NOTE: Bolts must have a maximum length of 16 mm + the thickness of your wheel rim

The Podium Hub supports steering wheels with 3x50 mm and 6x70 mm hole patterns.

P_HUB-QSG_CS_BCC_+_Rim_Attachment_6

CENTER + SHIFTER CALIBRATION

P_HUB-QSG_Center_Calibration_n

To calibrate your wheel center and shifter (sold separately), use the Fanatec PC driver.

MODES

P_HUB-QSG_Modes

1 - Press the button combination as shown
2 - Repeat to cycle through modes
3 - *Available modes are wheel base dependent
Note: ClubSport Button Cluster Pack required (sold separately)

HI TORQUE MODE

P_HUB-QSG_Hi_Torque_Mode

If you are using the Podium Hub without buttons, turn the steering wheel 90° and wait until the bar on the wheel base display disappears to accept the High Torque warning message on Podium DD wheel bases.

BUTTON MAPPING

P_HUB_QSG_Button_Mapping_Complete

Press and hold button #6 for 3 seconds for PlayStation® sign-in
on PlayStation®-compatible wheel bases.

VIDEO GUIDE

The product warranty is provided by CORSAIR MEMORY, Inc. Refer to the terms & conditions of CORSAIR MEMORY, Inc. on fanatec.com