クイックスタートガイド

CSL Elite Wheel Base +

CONTENTS

CSL E WB+ Content 1

- CSL Elite Wheel Base + (PS4™ version) (A)

- Table clamp (B)

- Table clamp screw with handle (C)

- Power supply unit (D)

- Power cord (regional) (E)

- USB connection cable (F)

- O-Ring (G)

- PS4™ button caps for ClubSport steering wheels (H) (ClubSport steering wheels sold separately)

- Black washers (I) (for mounting ClubSport Static Shifter Paddles)

CONNECTIONS

CSL E WB+ Connections 1

1: H-Pattern Shifters (H-pattern mode or SQ mode)

2: Static Shifter / Sequential Shifter (only SQ mode)

3: Handbrake

4: USB to PlayStation®4 (Use only the USB cable (F) with straight plug packed with the CSL Elite Wheel Base for PlayStation®4 to avoid damage to the USB port)

5: Pedals

TABLE CLAMP

CSL E WB+ Table Clamp 1

1: Insert the table clamp screw with handles (C) into the table clamp (B).

CSL E WB+ Table Clamp 2

2: Turn the table clamp screw (C) into the bottom centre of the CSL Elite Wheel Base + (A).

CSL E WB+ Table Clamp 3

3: Slide the CSL Elite Wheel Base + (A) onto the table top until the limiter blocks stop sliding at the edge of the table.

NOTE: Table clamp (B) has to be below table top.

CSL E WB+ Table Clamp 4

4: Tighten the table clamp (B) by turning the table clamp screw (C). Ensure that the table clamp's feet remain well aligned with the bottom of the table plate.

HARD-MOUNTING

CSL E WB+ Hard-Mounting 1

To hard-mount the wheel base, first disassemble the two blocks from the underside (upper left picture) using a 3 mm Allen key (not included). The CSL Elite Wheel Base + offers a three-point hard-mount location on the underside (upper right picture):

CSL E WB+ Hard-Mounting 2

IMPORTANT:

Use only good quality M6 bolts. Choose the correct length to prevent the thread from reaching more than 16 mm into the wheel base (table 20 mm -> bolt max 36 mm). Always use all three hard-mount points as this allows for a proper and stable installation and avoids damage!

NOTE:

To hard-mount the CSL Elite Wheel Base + to a table or rig with bolts please, find the printable drilling template below:

Drilling Template CSL E WB+ A4

iCUE download

RELEASE NOTES

Drilling Template CSL E WB+ A3

iCUE download

RELEASE NOTES

MODES

CSL E WB+ Modes 1

The CSL Elite Wheel Base + (A) will start in “PlayStation®4

Mode” by default. To switch to other modes press the “Mode”

button once. The LED above the Power button will indicate the

current operation mode:

- Blue indicates “PlayStation®4 mode”

- Red indicates “PC mode”

- Purple indicates “ClubSport Wheel Base V2 Compatibility Mode”

ON AND OFF

CSL E WB+ On and Off

To turn on the CSL Elite Wheel Base + (A), connect it to power and press the Power button on the right side of the CSL Elite Wheel Base + (A) for about one second. To turn off the CSL Elite Wheel Base + (A), press and hold the Power button for 5 seconds.

NOTE: Only use the power supply (D) and power cord (E)

included with this product.

ATTENTION

When starting up the CSL Elite Wheel Base + (A) for the first time please update the firmware, which can be obtained from www.fanatec.com. Follow the instructions provided in the user manual.

Compatibility with PlayStation®4 games on a case by case basis. For a full list of compatible games, please visit www.fanatec.com.