ClubSport Wheel Base "Bootloop" - Base re-starts itself repeatingly ClubSport Wheel Base startet von selbst immer wieder neu ("Bootloop")

If your ClubSport Wheel Base (V1 or V2) is restarting again and again by itself and being unable to complete the boot sequence you might have forgotten to update your Wheel Base Firmware BEFORE you put on the new wheel rim or wheel hub!

Please always download (from product page) and install the latest CSW Base Driver onto your PC. Start the wheel base without your new wheel rim/hub. Open the driver control panel. Install the embedded firmware by navigating to the "update" tab in the browser. All further steps will be explained there.

This is no isssue. The firmware of the ClubSport Wheel Base evolves continously and has to prepared for every possible new product which can be attached. Additionally we are always working to improve the performance of the device.

IMPORTANT:

  • Please also keep in mind that the driver also contains relevant firmware updates for other devices (as the CS USB Adapter, CSP V3, etc.). Those devices can be updated in the same way when connected by USB.
  • The firmware updates are also important if the hardware is used on consoles! You will have connect the devices to your PC by USB (for less than 5 minutes) to perform the update.

Wenn ihre ClubSport Wheel Base (V1 oder V2) von selbst immer wieder neu startet und sich nicht normal einschaltet lässt, so haben sie vermutlich vergessen die aktuellste Firmware auf der Base zu installieren BEVOR sie ihr neues Wheel bzw. ihren neuen Hub montiert haben

Bitte laden sie immer den aktuellsten Treiber (von der Produktseite) herunter und installieren sie diesen auf ihrem PC. Starten sie die Wheel Base ohne Lenkrad/Hub und öffnen sie das Treiberfenster über die Verknüpfung auf dem Desktop. Wenn sie nun in den "Update" Tab geben wird Schritt für Schritt erklärt wie das Firmware-Update durchgeführt werden kann. 

Dies ist kein Fehler - die Firmware der ClubSport Wheel Base wird laufend weiterentwickelt um alle neue Produkte zu unterstützen, welche angeschlossen werden und um die Performance weiter zu verbessern.

WICHTIG:

  • Bitte denken sie daran, dass der Treiber auch alle anderen relevanten Firmware Updates für andere Geräte (wie CS USB Adapter, CSP V3, etc.) enthält. Diese können in gleicher Art und Weise installiert werden, wenn das jeweilige Gerät per USB an den PC angeschlossen ist.
  • Die Firmware Updates sind ebenso wichtig, wenn das Gerät an einer Konsole verwendet wird. Für das Update muss dir Hardware allerdings kurz mit dem PC verbunden werden.