Der Artikel wurde erfolgreich hinzugefügt.

Podium Wheel Base DD2

1.499,95 € *

inkl. MwSt.
zzgl. Versandkosten

Dieses Produkt ist ausverkauft.
PC Dieses Produkt ist mit PC kompatibel. Für weitere Informationen bitte klicken.

Ausverkauft


Features

  • Ein individueller, von unseren Entwicklern entworfener Servomotor, und der erste Direct Drive Motor der zugeschnitten auf die Anforderungen beim SimRacing ist
  • Eine kabellose Daten-und Stromversorgung der Fanatec Wheels ermöglicht uneingeschränkte Rotationen des Lenkrades.
  • Der Outrunner Motor erreicht Motor-Spitzendrehmomente von 25Nm, vergleichbar mit dem Drehmoment der meisten echten Rennwagen mit Servolenkung
  • Der Haltedrehmoment der Podium Wheel Base DD2 liegt nie unter 20Nm, selbst unter voller Auslastung während eines Rennens
  • 5 Jahre Garantie auf die gesamte Wheel Base
  • Die Motorbeschleunigung  und die Geschwindigkeit  bleiben auf dem höchsten Niveau, selbst mit schweren Lenkrädern.
  • Sehr schwacher torque ripple gewährleistetnur minimalen mechanischen Widerstand und das gleiche reibungslose Fahrerlebnis wie in einem echten Auto
  • Kabellose QR-Technologie: Kabellose Übertragung der Daten (Infrarot) und Stromversorgung (Induktionsschleife) zwischen Motor und Schnellverschluss machen externe Kabel oder Batterien im Lenkrad obsolet.
  • Lenkwinkel: 2520 Grad (elektronisch begrenzt, einstellbar)
  • Integriertes 2,7” OLED-Display mit 256x64 Pixelnfür Tuning-Me, Echtzeit Motor- und Force-Feedback-Daten und den intelligenten Telemetrie-Modus (FanaLab wird benötigt). 
  • Standard Tuning-Menü erlaubt es Einsteigern sofort durchzustarten, ohne sich um Einstellungen kümmern zu müssen
  • Erweitertes Tuning-Menü erlaubt es Enthusiasten die Force-Feedback-Charakteristik ihren Vorlieben anzupassen
  • Integrierte Elektronik direkt im Gehäuse, kein externer Steuerungskasten benötigt
  • Unterstützt die Einstellung des Schleifpunkts der Kupplung (clutch bite-point mode)
  • Dank der integrierten Elektronik und Komponenten von höchster Qualität, ist eine sehr geringe Latenzzeit gewährleistet.
  • Vollständig zertifiziert mit CE, FCC, C-Tick, ROHS und allen anderen Zertifikaten, welche gesetzlich vorgeschrieben sind. Somit stellen wir sicher, dass dieses Produkt keine anderen elektronischen Geräte störend beeinflusst.
  • Ein Drehmoment-Dongle ermöglicht dem Benutzer die volle Leistung zu sperren/entsperren
  • Alle existierenden und zukünftige Peripheriegeräte werden unterstützt. 
  • Wählen Sie aus einer wachsenden Auswahl an Fanatec Lenkrädern aus vielen verschiedenen Stilen und in unterschiedlichen Preis/Qualitäts Level.
  • Der Not-Aus Knopf erlaubt sofortiges Handeln in einer Notsituation
  • Firmware kann für zusätzliche neue Features ganz einfach aktualisiert werden
  • Motortreiber-Firmware kann aktualisiert werden
  • Schnelle 1000 Hz USB Update Rate
  • Verbindung von 2 externen Shiftern (z.B H-Schaltung und Sequentielle-Schaltung) parallel möglich
  • Alle Peripheriegeräte können direkt mit der Wheel Base verbunden werden, dies erspart ihnen bis zu 5 externe USB Anschlüsse
  • Aluminium Gehäuse
  • Austauschbare Karbonfaserabdeckungen. 
  • Drei Befestigungslöcher an der Unterseite, sowie je 2 Befestigungslöcher seitlich. Eine feste und stabile Montage an einem Cockpit wird aufgrund des starken Drehmoment empfohlen. 
  • Volle Unterstützung des Fanatec SDK's stellt die Kompatibilität zu allen gängigen Spielen sicher. Auch Plattform übergreifend und "out of the box".
  • Kombiniert mit FanaLab-Software für PC-Anwendungen:
    • Zeigt Telemetriedaten des Spiels an. Beispielsweise Geschwindigkeit, Rundenzeiten, die Temperatur der Bremsen, Tachos auf externen Geräten wie z.B auf einem Smartphone, Tablet oder auf USB Monitoren, an.
    • Unterstützt die gängigen PC-Rennsimulatoren
    • Kontrollieren Sie Ihre erweiterten Tuning Menü Einstellungen und Voreinstellungen direkt über die Software auf den verknüpften Geräten.
    • Speichern Sie Spielspezifische Einstellungen direkt in der Software und diese Einstellungen werden automatisch ausgeführt, wenn das Spiel gestartet wird.
    • Neue, einstellbare FFB Funktionen wie Dämpfung und Reibung
  • Schnellverschlusssystem in Automobilqualitätmitdehnbarem Gummidämpfer(QR1) vormontiert. 
  • QR2 Base-Side (Type-M) in Motorsportqualitätals separates Aufrüstpaket im Lieferumfang enthalten. 
  • Weltweite Service Center verfügbar. 
 

Kompatibilität

Peripherie

  • Alle Fanatec Podium Lenkräder
  • Alle Fanatec ClubSport Lenkräder
  • Alle Fanatec CSL Lenkräder(QR1 Wheel-Side erforderlich*)
  • Alle Fanatec Pedale
  • Alle Fanatec Shifters
  • RennSport Cockpit V2 (verkauft nach Q4 2017) 
  • ClubSport Table Clamp V2

Plattformen

  • PC: Diese Wheel Base ist mit allen verfügbaren Lenkrädern kompatibel zu PC.​​
  • Xbox One® and Xbox Series X: Die Kompatibilität kann durch (separat erhältliche) Lenkräder wie beispielsweise dem ClubSport Lenkrad Universal Hub für Xbox One oder CSL Lenkrad P1 für Xbox One ermöglicht werden. Wenn ein Lenkrad ohne Xbox One® Lizenz an der Wheel Base verwendet wird, kann diese NICHT an der Xbox One®​ verwendet werden.
  • PlayStation®: Dieses Produkt ist zu keinem PlayStation® System kompatibel und kann auch nicht nachgerüstet werden.

Hinweise

  • Nicht für Kinder geeignet. Ein Wheel Base mit Direktantrieb ist kein Spielzeug! Die schnellen Bewegungen des Lenkrads und das starke Drehmoment können gefährlich sein. Bitte lesen Sie die Sicherheitshinweise.
  • Jetzt inklusive QR2 Base-Side (Type-M), separat verpackt.Wenn Sie Lenkräder mit QR2 verwenden möchten, müssen sie zuerst den QR2 Base-Side an der Wheel Base montieren. 

Verpackungsinformationen

  • Abmessungen (L x W x H) 51cm x 26cm x 28cm
  • Gewicht 13kg
  • Volumengewicht 7.42kg

Inhalt

  • Podium Wheel Base DD2 mit QR1 vormontiert 
  • QR2 Base-Side (Type-M), separatverpackt 
  • Not-Aus Knopf mit Fernbedienung
  • Dongle
  • Anleitung
  • Netzteil (480 Watt)
  • USB Kabel

Technische Spezifikationen

  • Plattform PC
  • Permanente Montage 3-hole pattern, 5-Loch-Schema von unten, Seitenbefestigung mit 2-Loch-Schema auf beiden Seiten
  • USB Updaterate 1000Hz
  • Maximaler Drehwinkel Unbegrenzt / Einstellbar
  • Anschlussports CAN-Bus, Daten, Drehmomentschlüssel, Handbremse, Not-Halt, Pedale, Schaltung 1, Schaltung 2
  • Display 2.7" 256x64 OLED
  • Table Clamp Optional
  • Kill Switch Included
  • Abdeckplatten Carbon-Faser
  • Displaymodi Clipping, FFB-Telemetrie, Wheel Base Telemetrie
  • Drehmoment Bis zu 25Nm
  • Tuning Menü über das Lenkrad Ja
  • Rev-LEDs an der Wheel Base Nein
  • Einstellbare ABS Vibration Ja
  • Einstellbare Bremskraft Ja
  • Einstellbarer Drift Modus Ja
  • Einstellbare FF Kraft Ja
  • Adjustable sensitivity Ja
  • Einstellbare Vibration Ja
  • Einstellbare Zentrierfeder Ja
  • Quick Release Ja
  • Kühlungseinheit Einfacher Lüfter
  • Modustaste Nein
  • Force Feedback Antriebssystem Direct Drive
Bewertungen lesen, schreiben und diskutieren... mehr
Information

FanaLab Software available here: https://forum.fanatec.com/categories/fanalab

Driver:
After installing the Fanatec Driver, open the Fanatec Wheel Properties page to run firmware updates. Open the Properties page again after each firmware update to check for further update prompts, depending on which devices are connected. For example, you may need to update the wheel base, motor, and steering wheel firmwares separately.

 

FAQ
Can I use my Fanatec gear on my Mac? Kann ich meine Fanatec Hardware auf meinem Mac nutzen? Can I use my Fanatec gear on my Mac?

At the moment, the products we have available in our webshop are only compatible with Windows PC ( WIN 7, 8, 10 and 11), PS4, PS5, Xbox One and Xbox Series X. Mac OS or other systems are currently not supported.  

Note: Console compatibility is limited for each product! Please check the compatibility section of the product page for each device for more information. 

 

Derzeit sind alle Produkte, die im Webshop verfügbar sind, nur mit Windows PC (Win 7, 8, 10 und 11), PlayStation 4, 5 und Xbox One, Xbox Series X kompatibel. Andere System werden nicht unterstützt. 

Die Funktionen der einzelnen Produkte können auf den Konsolen eingeschränkt sein. Daher empfehlen wir die Produktbeschreibungen der einzelnen Produkte genau zu überprüfen.  

MacでFanatecギアを使用できますか?

現時点では、ウェブショップで入手できる製品は、Windows PC、PS4、PS5、Xbox One、Xbox SeriesXとのみ互換性があります。Mac OSは現在対応されていません。

注:コンソールの互換性は、製品ごとに制限されています。詳細については、各デバイスの製品ページの互換性セクションを確認してください。

Fanatec compatibility to Logitech and Thrustmaster hardware FANATEC KOMPATIBILITÄT MIT LOGITECH UND THRUSTMASTER HARDWARE

We are often asked if you can use Thrustmaster or Logitech wheels, pedals, shifters or other accessories in combination with Fanatec hardware. In general the devices of different vendors are not compatible to each other. Therefore, you cannot directly connect products from different companies to each other or at least this is not supported.

In the past there have been adapters which might have worked to make such combinations possible but those solutions have not been reliable due to different techniques used in the hardware and different signal tolerances even if similar specs have been used. Fanatec cannot make any statements about third party adapters or similar solutions. We are putting a lot of effort into the goal of having the highest possible intercompatibility in between all our devices, which is not that easy to achieve. For any questions about compatibility we can only direct you to the information given on our product pages or within our FAQs.

 

The statement above is valid for every platform (especially on consoles!) EXCEPT PC...since you can connect multiple, individual USB devices there IF the game/simulation supports that.
This gives you multiple options to combine hardware of different vendors the way you want. Most simulation games on Windows PCs will allow you to use combinations like: Logitech wheel, Thrustmaster shifter and Fanatec pedals for example. Since Fanatec provides USB solutions for more or less every kind of hardware (shifter/handbrake by USB adapter, USB pedals, USB wheels, etc.) the possibilities to build your perfect setup are endless. 

Even if it is very common, please be so kind to make some research on the web or ask the simulation developer if multiple USB devices are supported.

Wir werden oft gefragt, ob man Thrustmaster- oder Logitech-Racing Wheels, -Pedale, -Schalthebel oder anderes Zubehör in Kombination mit FANATEC-Hardware verwenden kann.  

In der Regel sind die Geräte der verschiedenen Hersteller nicht miteinander kompatibel. Daher können Sie Produkte verschiedener Firmen nicht direkt miteinander verbinden oder zumindest wird dies nicht unterstützt.  

In der Vergangenheit gab es zwar einen Adapter, der solche Kombinationen ermöglicht hat, aber diese Lösung ist aufgrund unterschiedlicher Techniken in der Hardware und unterschiedlicher Signaltoleranzen nicht mehr möglich, selbst wenn ähnliche Spezifikationen verwendet wurden. 

FANATEC kann keine Aussagen oder Empfehlungen zu Adaptern von Drittanbietern oder ähnlichen Lösungen geben. Bei Fragen zur Kompatibilität können wir Sie nur auf die Informationen auf unseren Produktseiten oder in unseren FAQs verweisen. 

Die obige Aussage gilt für jede Plattform, (vor allem auf Konsolen!) außer PC, da Sie dort mehrere einzelne USB-Geräte anschließen können, wenn das Spiel bzw. die Simulation dies auch unterstützt. Auch wenn es durchaus üblich ist, recherchieren Sie bitte im Internet oder fragen Sie den Simulationsentwickler, ob mehrere USB-Geräte unterstützt werden. 

Dadurch haben Sie mehrere Möglichkeiten, Hardware verschiedener Hersteller so zu kombinieren, wie Sie es wünschen. Bei den meisten Simulationsspielen auf Windows-PCs können Sie Kombinationen verwenden wie:   

Zum Beispiel Logitech Lenkrad, Thrustmaster Shifter und FANATEC Pedale. Da FANATEC USB-Lösungen für mehr oder weniger jede Art von Hardware anbietet (Schalthebel/Handbremse per USB-Adapter, USB-Pedale usw.), sind die Möglichkeiten, Ihr perfektes Setup aufzubauen, nahezu endlos.

What can be set in the Tuning Menu of my wheel? (Tuning menu settings explained) Que peut-on régler dans le menu tuning du volant? (CSW / Clubsport Wheel) Welche Einstellungen können im Tuning Menu vorgenommen werden? (CSW / CSL Base)

Activate the Tuning Menu by pressing the Tuning Menu button on your steering wheel. The menu will be shown on the display of your steering wheel or wheel base (Podium DD's). To navigate through the Tuning Menu, use the directional stick (or FunkySwitch™) of the Fanatec® steering wheels.

Inside the Tuning Menu, you can change different values to tune the wheel. The following article will explain which features and values can be set. All wheels are shipped with a default setup which will work very well for most games. All options can be changed depending on the personal taste of the driver. 

There are two tuning menus available, the Standard tuning menu (that the wheel base is using by default) and the Advanced tuning menu. 

 

Standard tuning menu – Consisting of 1 Auto (A SET) and 1 Custom (C SET) setups Allows adjusting the core parameters only in order to provide comfort for beginners and provide optimum force feedback feeling for users who prefer to only plug and play 

 

Advanced tuning menu – Consisting of 1 Auto and 5 custom setups – Allows adjusting all parameters in order for the user to fine-tune the wheel base to fit the driving style and match the preference in terms of force feedback feeling to the slightest detail.  

 

To switch between the Standard and Advanced tuning menus, press the tuning menu button to open the tuning menu first, then press it again and hold it for 3 seconds.  

 

Auto setup explained:  

  • Allows games to control parameter values 

  • Select the Auto setup to activate it. It will be displayed as ‘’A SET’’ on the 1’’ OLED display, ‘’A_S’’ on the seven-segment displays and ‘’Auto Setup’’ on the 2,7’’ OLED display  

  • The Auto Setup indication will be shown when a game actively uses Auto Setup 

  • Select a parameter and use up/down to see the current value 

  • If no game uses Auto Setup, factory default values are used 

  • Wheel bases supporting Auto setup: CSL DD and GT DD Pro, P DD, CSL E WB+, CS WB V2.5 

  • Platforms: PC, PS5 / PS4 

 

Custom setup explained: 

  • Allows the users to set the parameter values to their preference 

  • Select the Custom setup to activate it. It will be displayed as ‘’C SET’’ on the 1'' OLED displays, ‘’C.SET.’’ on the seven segment displays and ‘’Custom Setup’’ on the 2,7’’ OLED display 

  • Select a parameter and press up and down to adjust its value 

  • The value is saved and will be used from this moment on 

  • Wheel bases: - CSL DD and GT DD Pro, P DD, CSL E WB+, CS WB V2.5 

  • Platforms: PC, PS5 / PS4, XBOX  

 

Tuning menu parameters explained:  

  

Setup 1 – S_1 (Setup 1 to 5) 
You can select and store up to 5 different setups directly in the Tuning Menu of your wheel base. Each setup contains the following parameters:  

 

Sensitivity – SENSIT - SEN  (default = AUTO) 

The sensitivity/wheel angle can be changed from 90° up to the maximum allowed by the wheel base. If the sensitivity is set to "AUTO", the PC driver or the console can control the value which is used by some games (e.g. Codemasters F1, Assetto Corsa Competizione, GT Sport, ...) 

The sensitivity range per wheel base is as follows:  

90° - 900° for the ClubSport Wheel Base (V1, V2 and V2.5) 

90° 1080° - CSL Elite Wheel Base, CSL Elite Wheel Base v1.1 and the CSL Elite Wheel Base+ PS4, 

90° - 2520° - Podium Wheel Bases (DD1, DD2 and DD1 PS4) 

 

Force Feedback – F.FEEDB. - FF  (default = 100) 

Force Feedback simulates the mechanical response you feel when driving an actual car through the help of the motor inside the wheel base. 
The maximum strength of the Force Feedback motors can be adjusted from 100% - 0% in increments of 1%. 

 

Brake Level Indicator – BLI (ABS in older drivers) (default = OFF) 
This feature can give you direct feedback about your brake inputs. If you set the value to 100, the vibration will start as soon as you give 100% brake input to the game. If you set it to 95%, the vibration will start if you push the brake to 95% or more. The BLI (ABS in older drivers) feature uses the vibration within your wheel rim and the vibration motor ithe Fanatec pedal set (ClubSport Pedals V2, ClubSport Pedals V3 and ClubSport Pedals V3i) 

Note: In order to control the vibration motors of your pedals, the pedal set must be connected directly to the wheel base and not as a standalone device via USB.  

 

Shock - SHO (default = 100)  

This function represents the strength of the shock/vibration motors inside the Fanatec® steering wheel, which can be adjusted from 100% - 0% (OFF) in increments of 10%. These vibration motors can be used by the game directly or by the BLI (ABS in older drivers) function.  

 

Force (FOR), Spring (SPR), Damper (DPR) effects - (default = 100) (range: OFF -> 010 … 120) 

These force feedback modifiers give you the ability to change the strength of the force feedback signals a game provides (only applicable if the game uses these effects). 100 means no modification; the lower values will reduce the strength and the higher values will increase the strength. In theory, there are three types of signals which a game can send:  

Force (FOR) - pushes the wheel into a specific direction  

Spring (SPR) - pulls the wheel towards the centre (steering angle 0) 

Damper (DPR) - creates friction (adjusting overall stiffness) 

Not every game is supporting all three types of effects. In some games, only one of the three is used to recreate all effects. 

 

Force Effect Intensity (FEI) - (default = 100)  

This parameter adjusts the overall intensity of force effects and can make effects smooth or sharp, depending on the user's preference. The setting can be adjusted in increments of 10, ranging from 0 to 100. (with 0 being the smoothest option and 100 being the sharpest and direct). Tuning this parameter can help to refine a harsh or spiky force feedback signal in some games.  

 

Function of the Multi Position Switch (MPS) - 4 modes- (default = AUTO) 

The MPS switch provides the user with the option to map a different car setting to each of the available position MPS switches (12 in total). For example, you can set the Traction Control and the ABS of the car, so you can change the values while racing, in order to find the right setting for you or to spare the tires. The switches can work in 4 different modes. 

MPS: Auto – The steering wheel decides which mode is appropriate for the game currently being played.  

MPS: Encoder – Simulates two buttons, one when you turn the MPS clockwise and one when you turn the MPS counter-clockwise 

MPS: Constant – The MPS outputs a constant button signal for each position (1 – 12)  

MPS: Pulse – The MPS outputs a specific button signal for each position, which is only sent as a single pulse when you move the switch.  

The following steering wheels and accessories have the MPS switches:  

 

Brake Force (BRF)(default = 50)  

This setting will allow you to adjust the sensitivity of your load cell brake pedal. If the BRF is set to 100 or MAX, then it will require the user to press the brake with maximum force in order to achieve 100% of the braking signal. Reducing the BRF to MIN will allow the user to achieve 100% of the braking signal with minimum effort. You can check the brake signal level in the driver (on your PC) or you can see it on the attached steering wheel LEDs (depending on the steering wheel type). 

 

*Settings available on the Direct Drive Wheel bases Only  

*Natural Damper (NDP) - (default = 50)  

The natural damper will give you an additional damper, which you can adjust from 100 to OFF. At 100, you will have the strongest dampening effect, which reacts to the acceleration and angle of your steering. If you turn it OFF, your steering will have no additional damping, making it easy to turn the wheel. The natural damper is a setting which can also help to reduce unwanted wheel oscillation.  

 

*Natural Friction (NFR) - (default = OFF) 

The natural friction setting is used to simulate the mechanical feel of a vehicle’s steering components. The higher the setting, the more resistance you will feel when rotating the wheel. This can enhance the feeling if driving vehicles without power steering, or with very wide tires. This setting can also help to prevent oscillation.  

 

*Natural Inertia (NIN) - (default = OFF)  

This setting simulates additional weight on the steering axis. It can be useful when using lighter wheels like the P1 or McLaren GT3. The Natural Inertia can also affect the Natural Friction (NFR) setting from feeling less ‘sticky’ on direction changes.  

 

*Force Feedback Linearity (LIN) - (default = OFF)  

The linearity mode can be set to ON and OFF. When enabled, this setting reduces the maximum FFB output by a small amount in order to guarantee consistent output between peaks and holding forces. It also ensures an improved general linearity between game output and wheel base torque output. 

 

*Force Feedback Interpolation (INT) (default = 6) 

Force Feedback Interpolation “INT” filters and smoothens the incoming rough game FFB signal and increases the refresh rate. For example, some games use 60Hz FFB signal, which can feel very rough and noisy, but this can be fixed with the Force Feedback Interpolation. By increasing the value, you reduce the rough feeling and increase the smoothness of the signal. You can set the value to OFF, meaning that you will get unfiltered raw force feedback signalTo enable the interpolation, the value must be set from 1 to 20.  

Dans le menu tuning, vous pouvez modifier les différents paramètres du volant. L'article suivant vous explique quelles caractéristiques et quels paramètres peuvent être réglés.

S_1 (Configuration 1-5)
Vous pouvez sélectionner et mémoriser jusqu'à 5 configurations différentes directement dans le menu de réglage du voant.
 
SEN (par défaut = 900)
La sensibilité et l’angle de rotation du volant peuvent être changés de 900° à 90° en fonction de vos besoins. Si SEN est réglé sur "OFF/Aut", le pilote du PC ou la PS3 peuvent directement configurer la valeur qui est utilisée par certains jeux (Codemasters F1 GT5 ...)
 
FF (par défaut = 100)
La force maximale des moteurs de retour de force peut être ajustée de 100 à 0% par tranche de 10%.
 
SHO (par défaut = 100)
La force des moteurs de chocs/vibrations à l'intérieur du volant peut être ajustée de 100 à 0%. Ces moteurs de vibration peuvent être utilisés directement par un jeu (Fanatec SDK) ou par la fonction ABS.
 
ABS (valeur par défaut = OFF)
Cette fonctionnalité peut vous donner des sensations de freinage sur-mesure. Si vous définissez la valeur à 100, les vibrations démarrent dès que vous freinez à 100% dans le jeu. Si vous la réglez à 95%, les vibrations démarrent si vous appuyez sur le frein à 95% ou plus. L'ABS active les moteurs de vibration logés dans votre volant (ils peuvent être désactivés en configurant SHO à "0") et le moteur de vibration sur les pédales CSP (V2) si elles sont directement connectées au volant - et non par USB.
 
LIN (défaut = OFF)
Le paramètre de linéarité peut modifier les données de votre volant. Lorsqu’il est réglé sur "OFF", il transfère les signaux de direction de façon linéaire à100%. Si vous augmentez le paramètre, le volant aura une sensibilité réduite au centre. Grâce à cette fonction, vous pouvez contrôler le volant de façon très précise en conduisant en ligne droite (comme dans le mode SEN 900°) même si vous voulez atteindre le braquage maximal déjà à 180 ° (SEN  360°).
 
DEA (par défaut = OFF)
Certains jeux supposent qu’un volant de course a une zone morte centrale, zone morte qui n’existe pas sur les volants Fanatec. En utilisant cette fonctionnalité, vous pouvez ajouter manuellement une zone morte selon vos préférences. Le paramètre peut être réglé de OFF à 100%.
 
DRI (par défaut = OFF)
Le mode "Drift" réduit la résistance globale du volant et vous permet de le faire tourner plus facilement. Il fonctionne presque comme une direction assistée. Il réduit l'amortissement du volant et le fait tourner plus rapidement. Si les paramètres sont trop élevés (ou si le FFB des jeux interfère avec cette fonction), vous risquez de ressentir des effets de tangage. Si cela se produit – réduisez le paramètre ou changez DRI sur "OFF".
 
FOR / SPR / DPR (par défaut = 100)
Ces fonctions d'ajustement de retour de force vous donnent la possibilité de changer les signaux de retour de force d'un jeu. En théorie, un jeu peut envoyer 3 types de signaux qu’un jeu peu envoyer: Force (pousse le volant dans une certaine direction) Spring (ramène le volant vers le centre) et Damper (crée une friction). Tous les jeux n’utilisent pas tous les effets existants et certains n’utilisent qu’un seul type d’effet afin de créer des sensations tout à fait différentes. En utilisant le menu de réglage du CSW, vous pouvez augmenter ou réduire ces différents effets séparément.
 
FEI (uniquement disponible pour les bases de roues CSW V2.5 et CSL)

par défaut sur CSW V2.5
disponible depuis la mise à jour 446, incluse avec le pilote v310

par défaut sur CSL Base: 050
disponible pour la base de roue CSL Elite depuis la mise à jour 313 incluse avec le pilote v292
et pour la CSL Elite Racing Wheel pour PS4 depuis la mise à jour 314 incluse avec le pilote v292

Cette option offre la possibilité d'ajuster l'intensité des effets de retour de force et de les arrondir ou de les adoucir: OFF signifie très doucement, ce qui atténue fortement le bruit mécanique de la base de roue. Si vous définissez la valeur à 100, les effets de retour de force sont très durs et directs. Adapter cette valeur individuellement au jeu correspondant peut aider à optimiser l'expérience de conduite.
 
 
Tous les réglages peuvent être effacés et remis sur "défaut" en ouvrant le menu de réglage et en maintenant enfoncé le bouton de menu tuning pendant 10 secondes. Lorsque les réglages sont réinitialisés, le volant indiquera "rSt".

 

Öffnen Sie das Tuning Menu indem Sie den Tuning Menu Button an Ihrem Lenkrad drücken. Das Menü wird auf dem Display Ihres Lenkrads oder Ihrer Wheel Base (Podium DDs) angezeigt. Um durch das Menü zu navigieren, nutzen Sie den Richtungsstick (oder FunkySwitch™) des Fanatec® Lenkrads. Einstellungen können ebenfalls in der Fanatec Wheel Property Page (oder Fanatec Control Panel) auf Ihrem PC geändert werden.

 

https://forum.fanatec.com/categories

 

Das CSL DD Tuning Menu ist ab Werk auf Standard Mode eingestellt. Wenn der Standard Mode aktiviert ist, sind nicht alle Einstellungen sichtbar und es gibt nur 1 anpassbares Setup Profile.

Um zwischen dem Standard und Advanced Mode zu wechseln, aktivieren Sie das Tuning Menu indem Sie den Tuning Menu Button auf Ihrem Lenkrad drücken und anschließend den Tuning Menu Button erneut drücken und für 3 Sekunden gedrückt halten.

 

Setup 1 - S_1 (Setup 1-5)
Es können bis zu 5 verschiedene Setups direkt im Tuning Menu Ihrer Wheel Base auswählen. Jedes Setup enthält die folgenden Parameter:

Sensitivity - SENSIT - SEN (standard = 900)
Die Sensitivity bzw. der Lenkwinkel kann von 900° (CSL E WB: 1080°) bis 90° ihren Vorlieben entsprechend verändert werden. Wenn die SEN Funktion auf "OFF/Aut" gesetzt wird kann der Wert durch den PC Treiber oder bestimmte Spiele (Codemasters F1, GT5, ...) selbstständig verändert werden. Fest eingestellte Werte bleiben unangetastet.
Ab Version 094 der CSW Firmware wird der Wert OFF mit "Aut" benannt. Dies bedeutet, dass diese Einstellung vom Treiber und von Spielen automatisch eingestellt werden kann.

Der Lenkwinkelbereich, aufgelistet nach Wheel Base:

90° - 900° für die ClubSport Wheel Base (V1, V2 und V2.5)

90° - 1080° - CSL Elite Wheel Base, CSL Elite Wheel Base v1.1 und die CSL Elite Wheel Base+ PS4,

90° - 2520° - Podium Wheel Bases (DD1, DD2 and DD1 PS4), CSL DD, GT DD

 

 
Force Feedback – F.FEEDB. - FF (Standard = 100)
Force Feedback definiert die maximale Stärke des Motors, wenn Force-Feedback-Effekte von Software / Spielen an die Wheel Base gesendet werden. Wenn FF auf OFF gesetzt ist, wird kein Force-Feedback-Effekt vom Wheel Base Motor ausgeführt. Wenn FF auf 001 eingestellt ist, führt der Motor nur 1 % der maximalen Motorleistung aus. Wenn FF auf 100 eingestellt ist, führt der Motor 100 % der maximalen Motorleistung aus.
 
Brake Level Indicator – BLI (ABS in älteren Treibern) (Standard = OFF)
Diese Funktion kann Ihnen direktes Feedback zu Ihren Brems Inputs geben. Wenn Sie den Wert auf 100 setzen, beginnt die Vibration, sobald Sie dem Spiel 100 % Bremseingabe geben. Wenn Sie ihn auf 95 % einstellen, beginnt die Vibration, wenn Sie die Bremse auf 95 % oder mehr drücken. Die BLI-Funktion (ABS in älteren Treibern) nutzt die Vibrationsmotoren in Ihrem Lenkrad und den Vibrationsmotor am Fanatec-Pedalset (ClubSport Pedals V2, ClubSport Pedals V3 und ClubSport Pedals V3i).

Beachten Sie: Um die Vibrationsmotoren Ihrer Pedale steuern zu können, müssen diese direkt mit Ihrer Wheel Base verbunden sein, und nicht separat via USB-Kabel zum PC.

 

Shock - SHO (standard = 100)
Diese Funktion stellt die Stärke der Stoß-/Vibrationsmotoren im Fanatec®-Lenkrad dar, die von 100 % - 0 % (OFF) in Schritten von 10 % eingestellt werden kann. Diese Vibrationsmotoren können direkt vom Spiel oder von der BLI-Funktion (ABS in älteren Treibern) verwendet werden.

 
 
Force (FOR), Spring (SPR), Damper (DPR) effects - (standard = 100) (Skala: OFF -> 010 … 120)

Diese Force-Feedback-Modifikatoren geben Ihnen die Möglichkeit, die Stärke der Force-Feedback-Signale eines Spiels zu ändern (gilt nur, wenn das Spiel diese Effekte verwendet). 100 bedeutet keine Änderung; die niedrigeren Werte verringern die Stärke und die höheren Werte erhöhen die Stärke. Theoretisch gibt es drei Arten von Signalen, die ein Spiel senden kann:

Force (FOR) - bewegt das Lenkrad in eine bestimmte Richtung

Spring (SPR) - zieht das Lenkrad in die Mittelstellung (Lenkwinkel = 0°)

Damper (DPR) - erzeugt Widerstand/Reibung (stellt die grundlegende Steifigkeit ein)

Nicht jedes Spiel unterstützt alle drei Arten von Effekten. In manchen Spielen wird nur einer dieser drei Werte genutzt, um alle Effekte zu erzeugen.

 

Force Effect Intensity (FEI) - (Standard = 100)

Dieser Parameter passt die Gesamtintensität von Krafteffekten an und kann die Effekte je nach Vorliebe des Benutzers weich oder hart stellen. Die Einstellung kann in 10er-Schritten von 0 bis 100 angepasst werden (wobei 0 die sanfteste Option und 100 die härteste und direkteste Option ist). Die Abstimmung dieses Parameters kann in einigen Spielen helfen, ein hartes oder spitzes Force-Feedback-Signal zu verfeinern.

 

Function of the Multi Position Switch (MPS) - 4 Modi – (Standard = AUTO)

Der MPS-Schalter bietet dem Benutzer die Möglichkeit, jeder Position der verfügbaren MPS-Schalter (insgesamt 12 Positionen) eine andere Fahrzeugeinstellung zuzuordnen. Sie können beispielsweise die Traktionskontrolle und das ABS des Autos einstellen, sodass Sie die Werte während des Rennens ändern können, um die für Sie richtige Einstellung zu finden oder die Reifen zu schonen. Die Schalter können in 4 verschiedenen Modi arbeiten.

MPS: Auto – Das Lenkrad entscheidet, welcher Modus für das aktuelle Spiel geeignet ist 

MPS: Encoder – Simuliert zwei Buttons, einen, wenn der MPS im Uhrzeigersinn gedreht wird, und einen wenn der MPS gegen den Uhrzeigersinn gedreht wird.

MPS: Constant – Der MPS sendet ein konstantes Button-Signal für jede Position (1 – 12) 

MPS: Pulse – Der MPS sendet ein spezifisches Button-Signal für jede einzelne Position, welches als einzelner Puls gesendet wird, wenn Sie den Switch bewegen.

Nur wenn Sie ein Fanatec® Lenkrad mit Multi-Position-Switches nutzen (wie z.B. das ClubSport Lenkrad Formula V2.5) ist dies verfügbar.

 

Brake Force (BRF) - (Standard = 50)

Mit dieser Einstellung können Sie die Empfindlichkeit Ihres Loadcell-Bremspedals einstellen. Wenn BRF auf 100 oder MAX eingestellt ist, muss der Benutzer die Bremse mit maximaler Kraft betätigen, um 100 % des Bremssignals zu erreichen. Durch die Reduzierung der BRF auf MIN kann der Benutzer mit minimalem Aufwand 100 % des Bremssignals erreichen. Den Bremssignalpegel können Sie im Treiber (an Ihrem PC) oder an den angebrachten Lenkrad-LEDs (je nach Lenkradtyp) ablesen.

 

Analogue Paddles (AP) - (Standard = CbP)

CbP (Clutch Bite Point): Beide, das linke und rechte analoge Paddle arbeiten parallel als Kupplung (Clutch), das stärker gedrückte Paddle zählt.

CH (Clutch / Handbrake): Linkes Paddle: Kupplung (Clutch) / Rechtes Paddle: Handbremse (Handbrake)

Bt (Brake / Throttle): Linkes Paddle: Bremse (Brake) / Rechtes Paddle: Gas (Throttle)

AnA (Mappable Axes): Die Paddles können als zwei zusätzliche Achsen belegt werden. Diese Funktion kann bei manchen Lenkrädern mit dem Joystick geteilt werden.

Nur verfügbar, wenn ein Lenkrad mit analogen Paddles (z.B. mit Podium Advanced Paddle Module) genutzt wird, aber kein bestimmter Knopf für den Wechsel zwischen diesen Modi vorhanden ist (z.B. Podium Hub und Podium Button Module Endurance)

 

*Einstellungen nur bei Direct Drive Wheel Bases verfügbar

*Natural Damper (NDP) - (Standard = 50)

Natural Damper bietet einen zusätzlichen Dämpfer, der von OFF bis 100 eingestellt werden kann. 100 hat die stärkste Dämpfungswirkung, die auf die Beschleunigung und den Winkel Ihrer Lenkung reagiert. Im ausgeschalteten Zustand hat Ihre Lenkung keine zusätzliche Dämpfung, was das Drehen des Lenkrads erleichtert.

Natural Damper ist nützlich, um unerwünschte Lenkradschwingungen zu reduzieren. Oszillation wird typischerweise durch Latenz in der Rückkopplungsschleife verursacht und tritt in Rennspielen häufiger auf, die nicht für drehmomentstarke Motoren optimiert sind. Der Standardwert von 50 ist ein gutes Gleichgewicht zwischen Lenkansprechverhalten und Schwingungsdämpfung.

 

*Natural Friction (NFR) - (Standard = OFF)

Natural Friction wird verwendet, um das mechanische Gefühl von Lenkungskomponenten zu simulieren. Eine höhere Einstellung bewirkt mehr Widerstand beim Drehen des Lenkrads. Dies kann das Fahrgefühl von Fahrzeugen ohne Servolenkung oder mit sehr breiten Reifen verbessern. Diese Einstellung kann auch dazu beitragen, Schwingungen (Oszillation) zu vermeiden. Natural Friction ist unabhängig vom Spiel-FFB und immer aktiv, auch wenn kein Spiel läuft.

 

*Natural Inertia (NIN) - (Standard = OFF)

Diese Einstellung simuliert zusätzliches Gewicht auf der Lenkachse. Es kann nützlich sein, wenn leichtere Lenkräder wie das P1 oder McLaren GT3 verwendet werden. Die natürliche Trägheit kann sich auch auf die Einstellung der natürlichen Reibung (NFR) auswirken, da sie sich bei Richtungsänderungen weniger „stockend“ anfühlt.

 

*Force Feedback Scaling (FFS) - (Standard = LIN)

Die FF-Skalierung reduziert die maximale FFB-Leistung um einen kleinen Wert, um eine konstante Leistung zwischen Spitzen und Haltekräften (Peak und Holding Torque) sowie eine verbesserte allgemeine Linearität zwischen Spielleistung und Drehmomentleistung zu gewährleisten. LIN (Linear) aktiviert diese Einstellung und PEA (Peak) deaktiviert diese Einstellung.

 

*Force Feedback Interpolation (INT) - (Standard = 6)

Force Feedback Interpolation „INT“ filtert und glättet das eingehende, rohe FFB-Signal des Spiels und erhöht die Bildwiederholfrequenz. Einige Spiele verwenden beispielsweise ein 60-Hz-FFB-Signal, das sich sehr rau und verrauscht anfühlen kann, aber dies kann mit der Force Feedback Interpolation behoben werden. Indem Sie den Wert erhöhen, reduzieren Sie das raue Gefühl und erhöhen die Glätte des Signals. Sie können den Wert auf OFF setzen, was bedeutet, dass Sie ein ungefiltertes Force-Feedback-Rohsignal erhalten. Um die Interpolation zu aktivieren, muss der Wert von 1 bis 20 eingestellt werden.

Which driver version should I choose (32 or 64 bit)? WelcheTreiber Version soll ich auswählen (32 oder 64 bit)?

There is a 32 bit and a 64 bit version of a Fanatec driver available. It depends on the "system type" of your PC which of those versions you need to choose. If the system type of your PC has a 32 bit operation system, you need the 32 bit version of the driver. If the system type of your PC has the 64 bit operation system, you will need the 64 bit version.

For finding this information go to the "Control Panel" of your PC -> "System and Security" -> System:

Es gibt eine 32 bit und eine 64 bit Version des Fanatec Treibers. Welche Treiber Version ausgewählt werden muss, hängt von dem jeweiligen "System Typ" des PC´s ab. Wenn Ihr PC ein 32 bit Betriessystem hat, benötigen Sie die 32 bit Version, wenn es ein 64 bit Betriebssystem ist, benötigen Sie die 64 bit Version.

Sie finden diese Information unter "Systemsteuerung" -> "System und Sicherheit" -> "System":

Can I use other (USB, RJ12, etc.) cables than the original ones? Kann ich anderen Kabel als die mitgelieferten (RJ12, USB, etc.) Kabel verwenden?

Any RJ12-RJ12 (6p6c straight) and USB (type A -- type B; USB 1/2.0; USB Type C) cable which has the right connectors on both ends can be used. If you use high quality cables of similar length to the originals, there should be no issues. Please keep in mind that FANATEC cannot guarantee perfect functionality of our products if third-party products are used, even if the combination should work! 

Important notes regarding (replacement) cables: 

  • Cables which are significantly longer than the original cables can cause connection issues 
  • Extension cables are often the source of connection issues. Longer high-quality cables are the better option 
  • If your product came with a high-quality ferrite core cable, a replacement cable should be of similar quality 
  • For USB Type C cables, please make sure that you are using USB Type C Data and not a Charging cable 

 

Q: Can I purchase replacement "RJ12--RJ12" / "USB A -- USB B / USB Type C (for the CSL DD)" cables from FANATEC? 

A: We should be able to offer replacement cables for all recent products. If they are not offered in the webshop, please ask our support team. Alternatively, it is also possible to use similar standard USB/RJ12 high quality cables, which are inexpensive and can be found at most electrical retailers. 

Grundsätzlich sollten alle standard RJ12--RJ12 (6p6c - straight) und USB (Type A auf Type B; USB 1/2.0) Kabel passen und einwandfrei funktionieren, welche die richtigen Stecker bieten. Sofern hochqualitative Kabel mit ähnlicher Länge verwendet werden, sollte dies kein Problem darstellen. Bitte beachten Sie, dass Fanatec keine uneingeschränkte Garantie auf Funktionalität geben kann, sofern Teile/Produkte von Drittherstellern verwendet werden bzw. involviert sind.

 

Wichtige Anmerkungen zu Ersatzkabeln:

  • Kabel welche (deutlich) länger als die Originalkabel sind, können zu Verbindungsproblemen führen
  • Verlängerungskabel (und Adapterstecker) sind oft die Ursache von mangelhafter Übertragungsqualität der Signale. Längere Kabel wären hier die bessere Option.
  • Wenn ihr Produkt mit einem hochwertigen Kabel inkl. Ferrit-Kern geliefert wurde, sollten sie als Ersatz ein ähnlich hochwertiges Kabel verwenden.


Frage: Kann ich ein (RJ12--RJ12 oder USB A -- USB B) Ersatzkabel von Fanatec kaufen?
Antwort: Wir sollten in der Lage sein für aktuelle Produkte Ersatzkabel zu Verfügung zu stellen. Falls diese im Webshop nicht gelistet sind, fragen sie bitte unser Supportteam danach. Es ist allerdings auch möglich ähnliche Standardkabel in hoher Qualität von anderen Händlern zu erschwinglichen Preisen zu kaufen und zu verwenden.

How to connect a wheel base to the Xbox One Anschließen einer Wheel Base an die Xbox One

In order to use your wheelbase on Xbox One, you will need an officially Xbox One licensed steering wheel.

The officially Xbox One-licensed Fanatec Steering Wheels are:

CSL Elite P1 Xbox One
https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-p1-for-xbox-one

CSL Elite McLaren GT3

Discontinued

ClubSport Steering Wheel Universal Hub for Xbox one V2
https://fanatec.com/eu-en/steering-wheels/clubsport-universal-hub-v2-for-xbox

Club Sport Steering Wheel Formula V2.5x

https://fanatec.com/eu-en/steering-wheels/clubsport-steering-wheel-formula-v2.5-x

and CSL Elite Steering Wheel WRC.

https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-wrc

 

The wheel base must be connected to the console via USB. All peripherals, like the CSL Elite Pedals Load Cell Kit, ClubSport Pedals V3 and ClubSport Pedals V3 Inverted, ClubSport Shifter and the ClubSport Handbrake, must be connected to the wheel base directly via the RJ12 cable only and not to the console.

There is no wireless connection for force feedback steering wheels on Xbox One. This is due to the specifications of the Xbox One and no limitation of the hardware from our side.

Attach one of those wheels to your wheelbase. If the wheel base is in PC mode, simultaneously press and hold the two buttons to change modes in order to switch to Xbox One mode. Please check the manual for the required combination for each wheel to switch modes. The drivers and manuals can be found in the “Downloads” section on each product page.

Please remember to (always) update your wheel base to the latest firmware version before you attach a new rim!

The newest firmware is always included in the latest driver for your product. You are required to connect your hardware to a PC to do the update.

Um Ihre Fanatec Wheel Base auf Xbox One nutzen zu können, benötigen Sie ein offiziell für Xbox One lizenziertes Fanatec Lenkrad.

 

Die offiziell Xbox One-lizenzierten Fanatec-Lenkräder sind:

 

CSL Elite P1 Xbox One

https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-p1-for-xbox-one

 

CSL Elite McLaren GT3

Verkauf eingestellt

 

ClubSport Lenkrad Universal Hub für Xbox One

https://fanatec.com/eu-en/steering-wheels/clubsport-steering-wheel-universal-hub-for-xbox-one

 

ClubSport Lenkrad Formel V2

https://fanatec.com/eu-en/steering-wheels/clubsport-steering-wheel-formula-v2

 

und CSL Elite Steering Wheel WRC

https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-wrcc

 

DieWheel Base muss über USB an die Konsole angeschlossen werden. Alle Peripheriegeräte, wie das CSL Elite Pedale Load Cell Kit, ClubSport Pedale V3 und ClubSport Pedale V3 Inverted, ClubSport Shifter und die ClubSport Handbremse, müssen nur über das RJ12-Kabel direkt an die Wheel Base und nicht an die Konsole angeschlossen werden.

 

Es gibt keine drahtlose Verbindung für Force-Feedback-Lenkräder auf der Xbox One. Dies ist auf die Spezifikationen der Xbox One zurückzuführen und keine Einschränkung der Hardware von unserer Seite.

 

Befestigen Sie eines dieser Lenkräder an Ihre Wheel Base. Wenn sich die Wheel Base im PC-Modus befindet, drücken und halten Sie gleichzeitig die beiden Tasten, um den Modus zu wechseln und in den Xbox One-Modus zu wechseln. Bitte lesen Sie in der Anleitung nach, welche Kombination für jedes Lenkrad zum Umschalten der Modi erforderlich ist. Die Treiber und Anleitungen finden Sie im Abschnitt "Downloads" auf jeder Produktseite.

 

Bitte denken Sie daran, Ihre Wheel Base (immer) auf die neueste Firmware-Version zu aktualisieren, bevor Sie ein neues Lenkrad montieren!

 

Die neueste Firmware ist immer im neuesten Treiber für Ihr Produkt enthalten. Um das Update durchzuführen, müssen Sie Ihre Hardware an einen PC anschließen.

Motor firmware shown as version ''0'' FIRMWARE DU MOTEUR AFFICHE EN TANT QUE VERSION ''0'' LA VERSIÓN DEL FIRMWARE DE MOTOR SE MUESTRA COMO “0” Firmware del motore mostrato come versione ''0'' Motor Firmware zeigt „0“ an

Please try the following software solution in order to resolve the issue:  

 

  1. Reset your devices by following this guide: https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly 
  2. Install the driver package again and update their firmware: https://fanatec.com/eu-en/driver 
  3. Perform the firmware update for the wheel base and the motor driver through the Firmware Update manager. In case you received the message “Firmware is up to date” and you are not able to proceed, please select “Manual update” located in the top right corner of the firmware manager, then proceed with the update of the firmware. 
 

  

In case the procedure above does not help, please reach out to technical support for further assistance. 

Veuillez essayer la solution logicielle suivante afin de résoudre le problème :

1) Réinitialisez vos appareils en suivant ce guide : https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly

2) Installez à nouveau le pack de pilotes et mettez à jour leur firmware : https://fanatec.com/eu-en/driver

3) Effectuez la mise à jour du firmware de la roue et du pilote de moteur via le gestionnaire de mise à jour du micrologiciel. Le gestionnaire de mise à jour peut indiquer « Firmware is up to date », dans ce cas, cochez « Manual update » dans le gestionnaire de mise à jour du micrologiciel et procédez à la mise à jour (réinstallez) le firmware.

Si la procédure ci-dessus ne vous aide pas, veuillez contacter le support technique pour obtenir de l'aide.

Por favor intente la siguiente solución de software para resolver el problema:
 
1) Restablezca sus dispositivos siguiendo esta guía:
https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly
 
2) Instale el paquete de controladores de nuevo y actualice su firmware: 
https://fanatec.com/eu-en/driver

3) Realice la actualización del firmware para la base de volante y el controlador del motor a través del Administrador de Actualizaciones de firmware (Firmware Update manager). El administrador de actualizaciones puede indicar que "El firmware está actualizado", en este caso marque en la casilla de verificación "Actualización manual" (Manual Update) en el gestor de actualizaciones de firmware y continuar con la actualización (reinstalación) del firmware.

 En caso de que el procedimiento anterior no ayude, comuníquese con el soporte técnico para obtener más ayuda.

Si prega di provare la seguente soluzione software per risolvere il problema: 

1) Ripristina i tuoi dispositivi seguendo questa guida: https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly

2) Installa nuovamente il pacchetto driver e aggiorna il firmware: https://fanatec.com/eu-en/driver

3) Eseguire l'aggiornamento del firmware per la base del volante e il driver del motore tramite il Firmware Update manager. Il gestore degli aggiornamenti può indicare "Il firmware è aggiornato", in questo caso selezionare "Aggiornamento manuale" nel gestore degli aggiornamenti del firmware e procedere con l'aggiornamento (reinstallare) il firmware. 

 

Nel caso in cui la procedura di cui sopra non sia di aiuto, contattare il supporto tecnico per ulteriore assistenza.

Bitte führen Sie die folgenden Schritte aus um das Problem zu beheben:


1) Setzen Sie Ihre Geräte zurück, indem Sie diese Anleitung befolgen: https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly


2) Installieren Sie das Treiberpaket erneut und aktualisieren Sie die Firmware: https://fanatec.com/eu-de/driver


3) Führen Sie das Update für die Wheel Base und den Motor Treiber über den Firmware Update Manager durch. Sollte der Update Manager „Firmware is up to date“ anzeigen, wählen Sie „Manual Update“ im Firmware Update Manager aus und fahren Sie mit dem Update (Neuinstallieren) der Firmware fort.

Sollten die oben genannten Schritte das Problem nicht beheben, kontaktieren Sie bitte unseren Technischen Support.

My firmware is up to date and I cannot reflash it Mon firmware est à jour et je ne peux pas le reflasher Mi firmware está actualizado y no puedo “reflashearlo” Il mio firmware è aggiornato e non posso aggiornarlo Meine Firmware ist auf dem neuesten Stand und ich kann diese nicht erneut flashen

With the new firmware manager, the ‘’Update’’ button will remain grey and not available in case you are having the latest firmware installed on your devices. This of course doesn’t mean that you are still not able to reflash/reinstall the firmware again. To make the option become available again, press the Manual Firmware Update button in the top right corner of the Firmware Manager window:  

 

 

 

This will unlock the firmware update option for each device. You can then proceed and perform the firmware update/reflash on the device you wish:  

 

Remarque : suivez les instructions ci-dessous uniquement lorsque vous êtes sûr à 100 % que la version du pilote PC est compatible avec vos produits Fanatec connectés. La dernière version du pilote PC est toujours disponible sur https://fanatec.com/driver .

Avec le nouveau gestionnaire de firmware, le bouton « Update » restera gris et non disponible au cas où vous auriez le dernier firmware installé sur vos appareils. Cela ne signifie bien sûr pas que vous ne pouvez toujours pas reflasher/réinstaller le firmware à nouveau. Pour que l'option redevienne disponible, appuyez sur le bouton Manual Firmware Update dans le coin supérieur droit de la fenêtre Firmware Manager :


Cela débloquera l'option de mise à jour du Firmware pour chaque appareil. Vous pouvez ensuite procéder et effectuer la mise à jour/reflashage du firmware sur l'appareil de votre choix :


Con el nuevo administrador de firmware (firmware updater), el botón de actualización (“Update”)  permanecerá en gris y no estará disponible en caso de que tenga el firmware más reciente instalado en sus dispositivos. Esto por supuesto no significa que no pueda reflashear o reinstalar el firmware de nuevo. Para activar la opción una vez más, seleccione la opción de actualización manual del firmware (Manual Firmware Update) ubicada en la esquina superior derecha en la ventana del administrador de firmware. 



Esto permitirá la opción de actualización de firmware para cada dispositivo. Entonces puede continuar y realizar la actualización de firmware o bien “reflashear” el dispositivo que desee. 


Con il nuovo gestore del firmware, il pulsante "Aggiorna" rimarrà grigio e non disponibile nel caso in cui sui dispositivi sia installato il firmware più recente. Questo, ovviamente, non significa che non sei ancora in grado di eseguire nuovamente il reflash/reinstallare il firmware. Per rendere nuovamente disponibile l'opzione, premere il pulsante Aggiornamento manuale firmware nell'angolo in alto a destra della finestra Firmware Manager: 

 

Questo sbloccherà l'opzione di aggiornamento del firmware per ogni dispositivo. Puoi quindi procedere ed eseguire l'aggiornamento/reflash del firmware sul dispositivo che desideri:


Mit dem neuen Firmware Manager wird der „Update“-Button ausgegraut und nicht verfügbar erscheinen, sofern die neueste Firmware bereits auf Ihren Geräten installiert ist. Dies bedeutet aber selbstverständlich nicht, dass Sie die Firmware nicht erneut installieren/flashen können. Um diese Funktion wieder verfügbar zu machen, setzen Sie ein Häkchen bei ‚Manual Firmware Update‘ in der oberen, rechten Ecke des Firmware Manager Fensters:

 

Dies ermöglicht die Option eines Firmware Updates für jedes Gerät. Sie können anschließend fortfahren und das Firmware Update für das gewünschte Produkt durchführen bzw. erneut flashen:


My steering wheel sensitivity is not matching with the one in game La sensibilité de mon volant ne correspond pas à celle du jeu La sensibilidad de mi volante no coincide con la sensibilidad en el juego La mia sensibilità del volante non corrisponde a quella del gioco Die Sensitivität meines Lenkrads stimmt nicht mit der im Spiel überein

Every car in every game can have a different steering angle. In order to match your steering angle with the one of the car, you will need to have the ‘Sensitivity’ setting (in the tuning menu) set to ‘Auto’. Once this is done, you will have to re-calibrate the controller in the game. 

As every game is different, some will require you to set the steering angle in the options menu. For example, in Assetto Corsa or Assetto Corsa Competizione, you will need to set the degrees in game and then apply the same setting in the tuning menu. 

For Dirt Rally and Dirt Rally 2.0 for example, you will need to perform the calibration in game, then set the saturation to 63 and set the sensitivity in the tuning menu to 900 degrees in order to get the exact steering lock of the car in-game.  

In case the steering angles are still not matching, please try check the following: 

  1. Turn your steering wheel at 90 degrees. 
  2. Open the tuning menu and go to the ‘Sensitivity’ setting 
  3. Start reducing the sensitivity setting until the in-game steering wheel starts to match that of your steering wheel. Turn the wheel left and right, and check that it is now matching with the in-game steering wheel.  

Some games may not have a realistic steering wheel animation, and will therefore be impossible to match with your steering wheel.  

Chaque voiture dans chaque jeu peut avoir un angle de braquage différent. Afin de faire correspondre votre angle de braquage avec celui de la voiture, vous devrez régler le paramètre Sensibilité (dans le menu de réglage) sur Auto. Ensuite, vous devrez terminer le calibrage du contrôleur dans le jeu.

Si vous obtenez toujours un angle de braquage différent sur votre volant et dans la voiture dans le jeu, vous devrez alors vérifier les points suivants :

Comme chaque jeu est différent, certains jeux nécessitent de régler l'angle de braquage dans les paramètres. Par exemple, dans Assetto Corsa et Assetto Corsa Competizione, vous devrez définir les degrés en jeu, puis appliquer le même paramètre dans le menu de réglage. Ensuite, toutes les voitures seront assorties.

Pour Dirt Rally et Dirt Rally 2.0 par exemple, vous devrez effectuer le calibrage dans le jeu, puis régler la saturation sur 63 et régler la sensibilité dans le menu de réglage sur 900 degrés afin d'obtenir le verrouillage de direction exact de la voiture en Jeu.

Si le volant ne correspond toujours pas, procédez comme suit : 

  1. Tournez votre volant à 90 degrés.
  2. Ouvrez le menu de réglage et allez dans le réglage ''Sensibilité''
  3. Commencez à réduire la sensibilité jusqu'à un point où vous voyez le volant sur l'écran correspondant à la position de votre propre volant. Tournez à gauche et à droite jusqu'au bout, jusqu'à ce que vous sentiez le soft lock (limite de rotation du volant) et vérifiez si la position du volant sur l'écran correspond à la vôtre.

Sachez que certains jeux n'ont pas d'animation réaliste de rotation du volant, il ne sera donc pas possible de faire correspondre le volant à l'écran avec le vôtre.

Cada coche en cada juego puede tener un ángulo de dirección diferente. Con el fin de hacer coincidir su ángulo de dirección con el del coche, usted tendrá que tener el ajuste de sensibilidad (en el menú de ajuste) establecido en automático. A continuación, tendrá que completar la calibración del controlador en el juego.  


 En caso de que usted todavía está recibiendo un ángulo de dirección diferente en el volante y en el coche en el juego, entonces usted tendrá que comprobar lo siguiente:  

Como cada juego es diferente, algunos juegos requieren para establecer el ángulo de dirección en los ajustes. Por ejemplo, en Assetto Corsa y Assetto Corsa Competizione, deberá establecer los grados en el juego y luego aplicar la misma configuración en el menú de ajuste. Entonces todos los coches estarán a la par.

Para Dirt Rally y Dirt Rally 2.0, por ejemplo, deberá realizar la calibración en el juego, luego establecer la saturación en 63 y establecer la sensibilidad en el menú de ajuste a 900 grados para obtener el bloqueo de dirección exacto del automóvil en el juego.   

 En caso de que el volante no coincida todavía, realice lo siguiente:  

  1. Gire el volante a 90 grados.  
  2. Abra el menú de ajuste y vaya a la configuración de ''Sensibilidad'' (Sensitivity).  
  3. Comience a reducir la sensibilidad a un punto, donde se ve el volante en la pantalla que coincide con la posición de su propio volante. Gire a la izquierda y a la derecha y todo el camino hasta que sienta el bloqueo suave y compruebe si la posición del volante en la pantalla coincide con la suya.   

Por favor, sepa, que algunos juegos no tienen una animación de giro del volante realista, por lo tanto, no será posible hacer coincidir el volante en la pantalla con el suyo. 

Ogni auto in ogni gioco può avere un angolo di sterzata diverso. Per far corrispondere il tuo angolo di sterzata a quello dell'auto, dovrai impostare la sensibilità (nel menu di messa a punto) su Auto. Quindi dovrai completare la calibrazione del controller nel gioco.  


Nel caso in cui ottieni ancora un angolo di sterzata diverso sul volante e nell'auto nel gioco, dovrai controllare quanto segue:  

Poiché ogni gioco è diverso, alcuni giochi richiedono di impostare l'angolo di sterzata nelle impostazioni. Ad esempio, in Assetto Corsa e Assetto Corsa Competizione, dovrai impostare i gradi nel gioco e quindi applicare la stessa impostazione nel menu di ottimizzazione. Quindi tutte le auto saranno corrispondenti.  

Per Dirt Rally e Dirt Rally 2.0, ad esempio, sarà necessario eseguire la calibrazione nel gioco, quindi impostare la saturazione su 63 e impostare la sensibilità nel menu di regolazione su 900 gradi per ottenere l'esatto bloccasterzo dell'auto in gioco.  


Nel caso in cui il volante non corrisponda ancora, eseguire le seguenti operazioni:  

  1. Ruota il volante di 90 gradi.  
  2. Apri il menu di sintonizzazione e vai all'impostazione "Sensibilità"  
  3. Inizia a ridurre la sensibilità fino a un punto in cui vedi il volante sullo schermo che corrisponde alla posizione del tuo volante. Gira a sinistra e a destra e fino in fondo finché non senti il ​​blocco morbido e controlla se la posizione del volante sullo schermo corrisponde alla tua.  

Tieni presente che alcuni giochi non hanno un'animazione realistica del volante, quindi non sarà possibile abbinare il volante sullo schermo con il tuo.

Jedes Fahrzeug in jedem Spiel/Simulation kann einen unterschiedlichen Lenkwinkel haben. Um den Lenkwinkel Ihrer Hardware mit dem des Fahrzeugs in der Simulation anzupassen, müssen Sie das Sensitivity Setting (Im Tuning Menü) auf ‚Auto‘ stellen. Anschließend müssen Sie die Controller Kalibrierung im Spiel abschließen. 

Falls Sie dennoch einen anderen Lenkwinkel als im Spiel haben, beachten Sie bitte folgendes: 

Da jedes Spiel anders ist, müssen Sie bei einigen Spielen den Lenkwinkel in den Einstellungen einstellen. In Assetto Corsa und Assetto Corza Competizione müssen Sie beispielsweise die Gradzahl im Spiel einstellen und dann die gleiche Einstellung im Tuning-Menü anwenden. Dann passen alle Lenkwinkel der Fahrzeuge. 

Für Dirt Rally 1 und 2 zum Beispiel, muss die Kalibrierung im Spiel vorgenommen werden, dann die Sättigung (Saturation) auf 63 gestellt werden und das Lenkrad auf 900° gestellt werden um den exakt gleichen Lenkwinkel wie beim Fahrzeug im Spiel einzustellen. 

Sollte das Lenkrad immer noch nicht mit dem im Spiel übereinstimmen, führen Sie die folgenden Schritte durch: 

  1. Drehen Sie Ihr Lenkrad auf 90° 
  2. Öffnen Sie das Tuning Menu und die „Sensitivity“ Einstellung 
  3. Beginnen Sie die Sensitivität zu senken, bis zu einem Punkt, an dem das Lenkrad auf dem Bildschirm im Spiel mit dem Lenkrad an Ihrer Wheel Base übereinstimmt. Drehen Sie das Lenkrad dann anschließend bis zum Anschlag links und rechts und überprüfen Sie, ob das Lenkrad, mit dem im Spiel übereinstimmt. 

Bitte bedenken Sie, dass nicht jedes Spiel eine realistische Anzeige des Lenkrads im Fahrzeug anzeigt, bei diesen Spielen ist es leider nicht möglich, das Lenkrad mit dem im Spiel über den Bildschirm zu synchronisieren. 

The steering wheel does not feel smooth when no force effects are active.

The feeling in question is caused by the magnets that are inside the base. Such unpleasant effects can be eliminated by performing the Motor Sensor Calibration.

 

In order to initiate the process, open the Fanatec Wheel property page and go to the ‘’Settings’’ tab. Take the steering wheel off the base and press the ‘’Motor sensor calibration’’ button. The base will perform the calibration procedure and it will take only a few seconds.

More FAQs

Zubehör