ClubSport Pedals V2 EU
ClubSport Pedals V2 EU

Please connect the Clubsport Pedals either to the wheel or by USB ! On consoles (Turbo S Wheel) you will have to plug the pedals to the wheel.

If you dissemble the Clubsport pedals to optimize or modify them please take care of the cable connections!
Driver (for PC)
The Fanatec wheel driver will also support the CSP V2. Please check and download the driver for your Fanatec wheel. If you do not have a Fanatec wheel please install the driver on the left side.
The pressure sensitive load cell brake on the CSP works completely different to all other pedals you might know. By the potentiometer besides the brake pedal you can adjust how much pressure is needed to have full brake power in the software. You get used to the feeling very fast and soon you benefit from the advantages over “normal” brake sensors.
Please don’t mind if there is a little deadzone. A real car will also not brake if you just slightly touch the pedal. Some pressure is needed and this will help you to brake much more precisely.
If the bars (driver/ingame) bar do not go to 100% if you press them or do not return to 0% without any pressure, please check if the screws shown on this picture are tightened properly:
Clutch/Accelerator magnet screws
If you think your CSP do not work like expected please connect them by USB to a PC if possible and check the function this way. Please check also the cable connections. If there is a problem and you could tell us where, we might be able to send you a spare part quickly.
Measurements and weights:
  • Width: 13.4 inch [340 mm]
  • Depth: 12.6 inch [320 mm]
  • Height: 7.9 inch [200 mm]
  • Weight: ~ 10.8 lbs [~ 4.9 kg]


Video manual: