Podium Button Module Endurance

NOTE: Please download our latest Wheel Base firmware from https://fanatec.com/driver

A small “ITM” icon in the bottom right of the BME display shows if ITM is accessible. To scroll through the screens, press and hold the Tuning Button while rotating the FunkySwitch™ left or right.

To access ITM on the Podium Base display, press and hold the Tuning Button while pressing UP with the FunkySwitch™, which will show the legacy screen and a small “ITM” icon in the bottom right if ITM is accessible. Scroll through screens by keeping the Tuning Button held down while pressing left or right with the FunkySwitch™.

NOTE: ITM functions require the use of FanaLab on a Windows PC.

If a center calibration is needed (e.g. after firmware update of the wheel base) when using the button module you need to press the tuning button as highlighted on the picture below to enter the Tuning Menu.

When Tuning Menu is active press the analogue stick and the FunkySwitchTM simultaneously to calibrate the wheel center.

To enter shifter calibration mode, simultaneously press the Tuning Button and the button highlighted below.

To enter the Tuning Menu, press the Tuning Button. To navigate inside the menu, use the FunkySwitch™. Press it up or down to access the five setups. Press the FunkySwitch™ right or left to go through the options and rotate the FunkySwitch™ to change option values.

To switch between wheel base modes, simultaneously press and hold the two buttons highlighted below, for one second.

• All regular button clusters and Universal Hub FunkySwitch™ must be removed before installing the Podium Button Module Endurance.
• Loosen the four bolts on the backside of the Universal Hub.

• Close the front cover and tighten the bolts.

• Align the Podium Button Module Endurance with the mounting holes of the Universal Hub.
• Place a suitable wheel rim (e.g. UH R300, UH R911, UH R911S) on top of the Podium Button Module Endurance.

• Use the longer mounting bolts (B) that are included in the Podium Button Module Endurance package and tighten down the Wheel Rim.
• Connect the DataPort-C cable of the Podium Button Module Endurance to the adapter that was mounted before.

NOTE: The Podium Button Module Endurance is only suitable for steering wheels with a 6x70mm hole pattern.

NOTE: Steering wheels of smaller diameters such as the UH R300 as well as third party rims may present tight spacing for fingers between the Podium Button Module Endurance and the rim's inner perimeter.