Bremspedal zu starken Widerstand

Mein Setup:

CSL Elite Wheel Base v1.1
ClubSport Lenkrad F1 2019
CSL Elite Pedale

Ich muss gegen einen viel zu großen Widerstand treten um richtig bremsen zu können.
Kann man das Bremspedal irgendwo konfigurieren?

PC Driver 334
WheelBaseFirmware 640
WheelbaseMotorFirmware 22
SteeringWheelFirmware 27

Comments

  • Joseph GossenJoseph Gossen Member, Moderator
    Marcel, Could you please write in English so we can better understand your issue?

    Danke
  • The resistance of the brake pedal is too high to use the brake properly.
    Is there any way to config the brake pedal?
  • Joseph GossenJoseph Gossen Member, Moderator
    Do you mean the brake is going to 100% with very little pressure or the physical brake is difficult to depress?

    If it is too sensitive you can increase the Brf to 80 on the wheel and it will require you to press firm to achieve 100% brake force.
  • I feel that i need to much power to reach a point where the car reacts first time on braking. tested in F1 2015, F1 2016, F1 2017, F1 2018

    I mean the opposit of what you want to reach with Brf 80.
    So I should try a lower value?
  • Joseph GossenJoseph Gossen Member, Moderator
    Yes.

    Brake force was changed so that if you have Brf at a low setting it will require very little pressure to hit 100% and vice versa if you set a high Brf it will require more force.
  • i will try it out
Sign In or Register to comment.