CSL Elite Steering Wheel Porsche Vision GT

a - 1x CSL Elite Steering Wheel Porsche Vision GT
b - 1x QR2 Lite Wheel-Side

1 - Download and install the latest Fanatec driver ( https://www.fanatec.com/s/download-apps-driver )

2 - Connect your wheel base to PC via USB; make sure your wheel base is in PC mode

3 - Open the Fanatec Control Panel

4 - Connect your steering wheel to your wheel base

5 - Click on "UPDATE" in the Firmware Manager

1 - After a wheel base firmware update "CAL" will be shown in the steering wheel display

2 - Enter the Tuning Menu

3 - Turn your wheel to the center position

4 - Press the button combination as shown

5 - Exit the Tuning Menu

1 - Put your shifter* in H-pattern mode (*shifter sold separately)

2 - Press the button combination as shown

3 - Gear to be calibrated will be shown in the steering wheel display

4 - Select the gear

5 - Confirm gear with the button shown

6 - Repeat for all gears

1 - Press the button combination as shown
2 - Repeat to cycle through modes
3 - *Available modes are wheel base dependent

1 - Enter the Tuning Menu

2 - Navigate the Tuning Menu and adjust the values

3 - Exit the Tuning Menu

1 - Enter the Tuning Menu

2 - Press and hold the highlighted buttons

3 - Pull both shifter paddles simultaneously while buttons from step 2 are still held

4 - When calibration is complete, “SHIFTER CAL OK” is shown on the steering wheel display. Release the shifter paddles

5 - Release the front buttons

6 - Exit the Tuning Menu

GSB = Game-Specific Button

*Tuning Menu Button

The product warranty is provided by CORSAIR MEMORY, Inc. Refer to the terms & conditions of CORSAIR MEMORY, Inc. on fanatec.com