CSL Elite Racing Wheel Formula for PC

XBox ONE Ready

The centerpiece: The CSL Elite Wheel Base

Positioned below the ClubSport Wheel Base V2, but more powerful than the V1, the CSL Elite Wheel Base is certainly powerful enough to handle all CSL and ClubSport steering wheels.

Interchangeable Steering Wheels

Change a Steering Wheel even during the game within seconds with the automotive grade quick release system established by our ClubSport series.

Powerful high-precision engine

The powerful brushless servo motor in combination with the single belt drive, delivers incrediblly smooth and super-fast Force Feedback effects, eliminating dead spots. It provides instant acceleration within it's up to 1080° of rotation.

The centerpiece: The CSL Elite Wheel Base

Performing features

The rev lights built into the top cover of the Wheel Base allow RPM information, and other functions (depending on the game), like fuel level.

Upgradeable compatibility to Xbox One®

This Wheel Base is compatible with PC in combination with the included ClubSport Steering Wheel Formula Black. Attach optional Steering Wheels to make this Wheel Base compatible to Xbox One®.

Table Clamp included

In addition to the hard-mount points, the racing wheel base comes with a table clamp right out-of-the-box allowing a stable and toolless attachment to your desk or table.

Authentic feeling

Replica of a steering wheel as used in formula cars. The compact diameter of 26 cm allows fast movements and reactions. It will make you feel like you are driving a real Formula car.

All Metal

CNC machined and anodized aluminum front plate on top of a metal cage and Quick Release provides a super sturdy construction. The grips are made of genuine Italian made Alcantara®. It is easy to clean and gives sensational grip and feeling.

LED Display

Show telemetry data directly on the big LED display. Speed, current gear, remaining fuel and many other parameters can be shown. You can configure your wheel settings during gameplay by using Tuning functions with the LED display.

Features

Ultra strong brushless servo motor which delivers up to 6Nm of torque on the steering axis
Single belt drive unit for direct power transfer from motor to steering axis and with big ball bearings for lowest friction
Very fast steering wheel acceleration - ideal for drifting
1080° of rotation which can be adjusted in the tuning menu of the attached Steering Wheel
Integrated rev light bar in the Wheel Base
Choose from a growing selection of very realistic Steering Wheels in many different styles
Quick Release system to allow the easy exchange of Steering Wheels within seconds, also during gameplay
Supports vibration motors in the steering wheel (depending on the steering wheel model)
Mount for ClubSport Static Shifter Paddles and other optional accessories
Table clamp included. Thickness range of the table board/desktop that the table clamp is able to lock is 1,0 to 6,0 cm
Firmware can be updated with new features
Fast 500 Hz USB update rate
Allows connection of two external shifters (e.g. H-pattern and sequential) in parallel
Connection ports for peripheral devices: USB, Power, Pedals, Shifter 1, Shifter 2, Handbrake
Replica of a steering wheel as used in formula cars. The compact diameter of 26 cm allows fast movements and reactions
Durable construction of the steering wheel fully made of metal
Grips made of genuine Italian made Alcantara®. This material is easy to clean and provides sensational grip
11 Buttons plus two paddle shifter buttons with ultra-reliable switches.
Analog joystick to look around in the Cockpit or to map with any other axis
7-way Encoder switch to change settings: Turn left; turn right; move left, right, up and down; push(active in Tuning menu and compatible with any PC game)
LED bar to show motor RPM in the steering wheel also
LED display to show telemetry functions. Works with several popular PC games like iRacing or rFactor
Adjustable and detachable paddle shifters completely made of metal. Adjust angle, distance to rim and travel of the paddles
Tuning functions* with LED display of the steering wheel to adjust settings independent from the game and during gameplay
- Saves up to 5 wheel set-ups
- Adjust sensitivity independent from the game. Turning angle can be adjusted in the wheel from 90° to 1080°
- Adjust force feedback strength during game play
- Adjustment for vibration intensity in the steering wheel (depending on the steering wheel model). The vibration motors can be used by a game directly or by the ABS function
- Simulate ABS vibration in the steering wheel (depending on the steering wheel model) and on pedals with rumble motor like the ClubSport Pedals V3 by setting a starting point at % of brake input
- Change the linearity in the steering axis to get the precision of a 1080° wheel and the fast movement of a 270° wheel
- Add some artificial dead zone to avoid shaking on straights if needed
- Use the drift mode to reduce the overall resistance of the wheel and let it turn more easily, almost like adjustable power steering
- Customize the force feedback sensations by changing the spring, force effects and dampening forces
- Adjust the brake force sensitivity of compatible loadcell pedals like the ClubSport Pedals V3 or the CSL Elite Pedals LC
- * Tuning functions are subject to change.

Compatibility

Peripherals:

All Fanatec ClubSport Steering Wheels
All Fanatec CSL Steering Wheels
All Fanatec ClubSport, CSR, CSR Elite, CSL and CSL Elite Pedals
All Fanatec Shifters (two shifters simultaneously)
Fanatec ClubSport Static Shifter Paddles
Fanatec ClubSport Handbrake (direct connection to Wheel Base)
Mounting on Cockpits and Wheel Stands: 3 hard-mount points on the bottom of the Wheel Base. Please refer to the drilling template in the download section for the hole pattern and distances. The hole pattern is identical with the ClubSport Wheel Bases without the angle adapter (3 hard-mount holes). Please take not that the CSL Elite Wheel Base hole pattern is NOT compatible to the the discontinued CSL Seat.

Platforms:

Xbox One^®: The compatibility can be upgraded with (optional) steering wheels like the ClubSport Steering Wheel Universal Hub for Xbox One or the CSL Steering Wheel P1 for Xbox One. Without any Xbox One^® licensed steering wheel attached, the wheel base is NOT compatible to Xbox One^®.
PlayStation^®: This product is not compatible to any PlayStation^® console and cannot be upgraded to achieve compatibility.
This racing wheel is compatible with PC in combination with the included steering wheel and all other available steering wheels.

Special Notes

In order to drive a sim race you need a set of pedals (not included). Please use the product configurator to configure your system.
Table clamp included. You can also mount it with screws to a cockpit or wheel stand (see drilling template in download section).
No hard-mount screws included. Please read the manual for information about qualified screws.
To connect discontinued Fanatec Pedals with PS/2 Socket like CSP v1/v2 or CSR, you need the additional PS/2 to RJ12 cable.
This product comes as a set, delivered as seperate products for assembly.
Please check the product description sites of the CSL Elite Wheel Base and ClubSport Steering Wheel Formula Black for more detailed information about the individual products.

What's included

CSL Elite Wheel Base
Table Clamp
Power supply (cables: socket to power supply 1,5 m/6 ft.; power supply to wheel base 1,5 m/6 ft)
USB cable (2 m/6 ft.)
ClubSport Steering Wheel Formula Black
Quick Release safety pin for long storage
Quick Release safety screw for permanent mount
Quick Guides

Model of the racing wheel
CSL Elite Racing Wheel - officially licensed for PS4™
CSL Elite Racing Wheel Formula for PC
CSL Elite Racing Wheel for Xbox One and PC
ClubSport Racing Wheel BMW for PC
ClubSport Racing Wheel Forza Motorsport for Xbox One and PC

Code
CSL E RW PS4
CSL E RW FB
CSL E RW P1X
CSW V2.5 RW BMW
CSW V2.5 RW GTF

Compability
* Xbox One compatible steering wheel required
PC
PS4
Xbox One Ready*
PC
XBOX ONE Ready*
PC
XBOX ONE
PC
XBOX ONE Ready*
PC
XBOX ONE

Features

Torque on the steering axis up to
> 6 N.m
> 6 N.m
> 6 N.m
> 8 N.m
> 8 N.m

Degrees of rotation
90°-1080°
90°-1080°
90°-1080°
90°-900°
90°-900°

Main Material
ABS + Aluminium
ABS + Aluminium
ABS + Aluminium
CNC machined Aluminum
CNC machined Aluminum

Wheel Base Quick Release
Yes / Steering Wheel with simplified QR
Yes / Steering Wheel with simplified QR
Yes / Steering Wheel with simplified QR
Yes
Yes

Position Sensor
Single Optical Sensor
Single Optical Sensor
Single Optical Sensor
Dual Magnetic Hall Sensors
Dual Magnetic Hall Sensors

Cooling system
Single fan
Single fan
Single fan
Double fan
Double fan

Force Feedback drive motor
New Brushless Servo Motor with improved electronics
Brushless Servo Motor
Brushless Servo Motor
New Brushless Servo Motor with improved electronics
New Brushless Servo Motor with improved electronics

Force Feedback drive system
Single gear toothed belt drive
Single gear toothed belt drive
Single gear toothed belt drive
Two multi-v-ribbed belts
Two multi-v-ribbed belts

Force Feedback drive material
ABS pulleys with ball bearings
ABS pulleys with ball bearings
ABS pulleys with ball bearings
CNC machined Aluminum pulleys with ball bearings
CNC machined Aluminum pulleys with ball bearings

USB update rate
1000 Hz
500 Hz
500 Hz
1000 Hz
1000 Hz

Updatable firmware
Yes
Yes
Yes
Yes
Yes

Updatable motor driver firmware
Yes
No
No
Yes
Yes

Connection ports
Shifter1, Shifter2, Pedal, Handbrake
Shifter1, Shifter2, Pedal, Handbrake
Shifter1, Shifter2, Pedal, Handbrake
Shifter1, Shifter2, Pedal, Data
Shifter1, Shifter2, Pedal, Data

Hardmount
3-hole pattern
3-hole pattern
3-hole pattern
3-hole pattern / 4-hole pattern
3-hole pattern / 4-hole pattern

Mode Button
Yes
Yes
Yes
No
No

Table Clamp
Included
Included
Included
Optional
Optional

Rev Lights on Wheel Base
Yes
Yes
Yes
No
No

Rev Lights on Steering Wheel
illuminated RevStripe
Yes
illuminated RevStripe
Yes
No

Tuning Menu through steering wheel
Yes
Yes
Yes
Yes
Yes

Adjustable sensitivity
Yes
Yes
Yes
Yes
Yes

Adjustable FF strength
Yes
Yes
Yes
Yes
Yes

Adjustable spring
Yes
Yes
Yes
Yes
Yes

Adjustable shock
Yes
Yes
Yes
Yes
Yes

Adjustable damper
Yes
Yes
Yes
Yes
Yes

Adjustable drift mode
Advanced drift mode
Yes
Yes
Advanced drift mode
Advanced drift mode

Adjustable brake force
Yes
Yes
Yes
Yes
Yes

Adjustable ABS vibration
Yes
Yes
Yes
Yes
Yes

Steering Wheel Diameter
300 mm
260 mm
300 mm
320 mm
330 mm

Steering Wheel Grip Material
Perforated genuine leather grips and suede fabric
Alcantara
leather-textured rubber coating
Alcantara
Leather

Number of Buttons on Steering Wheel
12
11
12
11
12+16

Analog Joystick on Steering Wheel
No
Yes
No
Yes
No

Funky switch/direction stick on Steering Wheel
5 -way
7 -way
5 -way
7 -way
7 -way

Vibration Motors in Steering Wheel
No
Yes (2)
No
Yes (2)
No

Detachable Button Caps on Steering Wheel
Changeable / racing style buttons included
No
No
No
Yes

Steering wheel paddle shifter adjustability
No / Snapdome™ technology
Angle/distance to rim/travel/detachable
No
Angle/distance to rim/travel/detachable
Angle/distance to rim/travel/detachable on small formula style plus width on changable big GT style paddles

Compatible Fanatec Accessories

Other Steering Wheels
All CS / CSL Steering Wheels
All CS / CSL Steering Wheels
All CS / CSL Steering Wheels
All CS / CSL Steering Wheels
All CS / CSL Steering Wheels

Pedals
All CS / CSR / CSR Elite / CSL / CSL Elite Pedals
All CS / CSR / CSR Elite / CSL / CSL Elite
All CS / CSR / CSR Elite / CSL / CSL Elite Pedals
All CS / CSR / CSR Elite / CSL / CSL Elite Pedals
All CS / CSR / CSR Elite / CSL / CSL Elite Pedals

Static Shifter Paddles
Yes
Yes
Yes
Yes
Yes

Shifters
All (2 simultaneously)
All (2 simultaneously)
All (2 simultaneously)
All (2 simultaneously)
All (2 simultaneously)

Handbrake
All
All
All
All / if connected through pedals
All / if connected through pedals

Cockpits/ Wheel Stands
With 3-hole pattern only / 3D-printable 4-hole pattern adapter downloadable
With 3-hole pattern only / 3D-printable 4-hole pattern adapter downloadable
With 3-hole pattern only / 3D-printable 4-hole pattern adapter downloadable
All
All

05/2017

Downloads

Information

Latest firmware version

The latest firmware for this product is included into the most recent drivers and cannot be downloaded separately. Please connect all Fanatec devices to your PC and power them on before you install the new drivers!

Drilling template - additional information:

When printing the Drilling Template at home, please make sure that the print size is 100% (file size = print size).Therefore deactivate "automatic page scaling" in the print dialog for example.

Subject	Description
+ How to calibrate the wheel center of a ClubSport or CSL Wheel Base	If the center position of your ClubSport Wheel (CSW / CSL E WB) does not match the ingame wheel o... If the center position of your ClubSport Wheel (CSW / CSL E WB) does not match the ingame wheel or after a firmware flash the wheel center has to be set. Please follow this procedure to center the wheel properly: https://www.youtube.com/watch?v=yvhAKxjit8o 1. Power wheel on 2. Open the tuning menu (by pressing the tuning menu button) 3. Turn the wheel to its center position 4. Press both joystick buttons simultanously. You may also press them twice 5. Check if the CSW wheel center position matches the one in the driver menu (best option) or inside a game (compare to ingame wheel). Please note that in-game-wheel and your gaming wheel do not have to show matching positions when you turn the wheel. This changes dynamicall if you (driver/tuning menu) or the game itself changes the wheel angle/sensitivity. Some games also don't feature 900° rotation animations (e.g. GT5) even if the controller input supports that. This can be very misleading! Alternatively you can see in our video manual how the wheel center can be set: Wenn die Nullstellung ihres ClubSport oder CSL Wheels (CSW/CSL WB) nicht mit jener des "in-game Lenkrades" übereinstimmt, sowie nach einem Firmware Update, muss das Lenkrad neu kalibriert werden. Bitte führen sie folgende Schritte durch um die Center Position des Lenkrades neu zu setzen: https://www.youtube.com/watch?v=yvhAKxjit8o 1. Schalten sie das Lenkrad ein 2. Öffnen sie das Tuning Menu (durch drücken des Tuning Buttons) 3. Drehen sie das Lenkrad in seine Mittel- bzw. Nullstellung 4. Drücken sie beide Joysticks-Buttons (nicht kippen!). Zur Sicherheit ist es auch möglich direkt 2x drücken. 5. Überprüfen sie die Center Position mit Hilfe des Treiber Menus (beste Option) oder auch in einem Spiel (Vergleich mit dem "in-game Lenkrad). Bitte beachten sie, dass das Lenkrad im Spiel und ihr ClubSport Wheel nicht zwangsläufig die gleiche Winkelstellung zeigen müssen. Dies ändert sich dynamisch when im Treiber, Tuning Menu oder im Spiel der Lenkwinkel geändert wird. Manche Spiele zeigen auch keine 900° Lenkanimationen, auch wenn das Spiel (Bsp.: GT5) solche Controller-Inputs untersützt. Sie können auch in unserem CSW Video Manual sehen wie diese Einstellung vorgenommen wird: Si la position centrée de votre volant Clubsport (CSW) ne correspond pas à celle du volant dans le jeu ou si le centrage du volant doit être réinitialisé après la mise à jour du firmware, veuillez suivre les instructions suivantes: 1. Allumez le volant 2. Ouvrez le menu de réglage (en appuyant sur le bouton du menu tuning) 3. Positionnez le volant de façon centrée 4. Appuyez simultanément sur les deux joysticks 5. Vérifiez que la position centrée du volant CSW correspond à celle du menu du pilote (meilleure option) ou à celle du jeu (comparez au volant dans le jeu) Veuillez noter que le volant dans le jeu et votre volant n'ont pas obligatoirement des positions identiques lorsque vous tournez. Cela change de façon dynamique si vous-même (conducteur/réglage du menu) ou le jeu modifie l'angle de braquage/la sensibilité. Vous pouvez également visionner le manuel vidéo pour savoir comment régler le centre du volant. もし ClubSport Wheel (CSW)のセンターがインゲームのステアリングと一致しない場合や、ファームウェアーフラッシュを行った場合センター合わせを実行する必要があります。以下の手順に従いセンター合わせを行ってください。 1. 電源ON 2. tuning menuを開く (bpressing the tuning menu ボタンを押してください。) 3. wheelを中心に合わせた状態にしてください。 4. 両方のジョイスチックボタンを同時に押してください。. 二回おしても問題ありません。 5. CSW wheel センターが driver menu (best option)に一致しているかまたはゲーム内wheelと一致しているか。 Please note that in-game-wheel とgaming wheel はwheelを回転している状態では必ずしも一致しませんがこれは問題ではありません。これはドライバー設定または、ゲーム自体がangle/sensitivityといったパラメターを変更するためです。GT5等いくつかのゲームはゲームコントローラの900° 回転を入力としてサポートするにもかかわらず900° 回転をアニメーションをサポートしません。これは非常にミスリーディングです。以下のビデオで上記手順を確認できます。 Open in a new window
+ Why does my wheel not stop perfectly centered after starting the device?	The start routine is made to check the wheels functions and it is not necessary that the wheel do... The start routine is made to check the wheels functions and it is not necessary that the wheel does come to a stop in the perfectly centered ("0") position. Please keep in mind that the position where the wheel stops its starting sequence can be affected by various tuning menu settings. This will still not affect the centering (or the 0-position of the wheel in software). To check the proper centering please use our PC driver or the telemtry functions in the game on your console. If the wheel is not perfectly centered (showing the 0-position in software when the physical wheel is moved to the center position) please "calibrate the wheel center" with the button combination mentioned in the FAQs, in the Qickguide or in the (video) manual. Please keep in mind that you could accidentely calibrate the wheel 360° off the real wheel center as our 900° wheels pass the center position 3 times if you turn it through its full range of movement! Die Startroutine ist nötig um die Grundfunktionen des Lenkrades zu testen und zu initialisieren. Es ist nicht nötig, dass das Lenkrad perfekt zentriert (in der 0-Position) zum stehen kommt. Bitte denken sie daran, dass die Position in der das Lenkrad nach der Startsequenz stehen bleibt von verschiedenen Einstellungen im Tuning Menu beeinflusst werden kann. Die wird allerdings nicht die wirkliche Nullstellung beeinflussen welche sie in der verwendeten Software (PC / Spiel / Treiber) sehen können. Um die korrekte Zentrierung zu überprüfen verwenden sie bitte unseren PC Treiber oder die Telemetriedaten des verwendeten Spiels auf ihrer Konsole. When das Lenkrad nicht perfekt zentriert ist (und nicht in der Software die O-Position zeigt wenn das Lenkrad in seiner physischen Mittelstellung ist) so kalibrieren sie bitte das Lenkrad ("calibrate wheel center") so wie in den FAQs, im (Video) Handbuch oder in Quickguide beschrieben. Bitte denken sie daran, dass sie die Nullstelle versehentlich um 360° falsch kalibrieren könnten, da unsere 900° Lenkräder diese Position im gesamtem Lenkbereich 3 mal überschreiten! Si la position centrée de votre volant Clubsport (CSW) ne correspond pas à celle du volant dans le jeu ou si le centrage du volant doit être réinitialisé après la mise à jour du firmware, veuillez suivre les instructions suivantes: 1. Allumez le volant 2. Ouvrez le menu de réglage (en appuyant sur le bouton du menu tuning) 3. Positionnez le volant de façon centrée 4. Appuyez simultanément sur les deux joysticks 5. Vérifiez que la position centrée du volant CSW correspond à celle du menu du pilote (meilleure option) ou à celle du jeu (comparez au volant dans le jeu) Veuillez noter que le volant dans le jeu et votre volant n'ont pas obligatoirement des positions identiques lorsque vous tournez. Cela change de façon dynamique si vous-même (conducteur/réglage du menu) ou le jeu modifie l'angle de braquage/la sensibilité. Vous pouvez également visionner le manuel vidéo pour savoir comment régler le centre du volant. もし ClubSport Wheel (CSW)のセンターがインゲームのステアリングと一致しない場合や、ファームウェアーフラッシュを行った場合センター合わせを実行する必要があります。以下の手順に従いセンター合わせを行ってください。 1. 電源ON 2. tuning menuを開く (bpressing the tuning menu ボタンを押してください。) 3. wheelを中心に合わせた状態にしてください。 4. 両方のジョイスチックボタンを同時に押してください。. 二回おしても問題ありません。 5. CSW wheel センターが driver menu (best option)に一致しているかまたはゲーム内wheelと一致しているか。 Please note that in-game-wheel とgaming wheel はwheelを回転している状態では必ずしも一致しませんがこれは問題ではありません。これはドライバー設定または、ゲーム自体がangle/sensitivityといったパラメターを変更するためです。GT5等いくつかのゲームはゲームコントローラの900° 回転を入力としてサポートするにもかかわらず900° 回転をアニメーションをサポートしません。これは非常にミスリーディングです。以下のビデオで上記手順を確認できます。 Open in a new window
+ Using display, vibration and rev LEDs in (more) PC games	EVERY PC game can use extended features (display, vibration, rev LEDs, rev Stripe, etc.) of our F... EVERY PC game can use extended features (display, vibration, rev LEDs, rev Stripe, etc.) of our Fanatec Wheel products as well as ABS software controlled vibration (CSP pedals) but the game developer has to implement those features. We are rolling out the SDK right now (Okt. 2012)to them and they can implement whatever they want. CSR, CSRE, GT2, PWTS, GT3V2: Fully supported using firmware 750+ CSW Series: Fully supported (all firmwares) CSL Series: Fully supported ClubSport Pedals: Fully Supported Great example: Codemasters just updated F1 2012 on PC to use the SDK directly without any necessary modifications. Alternatively you can use Fanaleds or SLIMax Manager to activate these unique features in many games. Both great applications can be downloaded for free: www.fanaleds.com www.eksimracing.com -> If a game features native SDK support it will override the use of any 3rd party tool like Fanaleds. JEDES PC Spiel kann kann auf die erweiteren Funktionen (Display, Vibration, LEDs) von Fanatec Lenkrädern oder Pedalen (CSP: spielgesteuerte ABS Vibration) zugreifen, sofern der Spieleentwickler diese Funktionen unterstützt. Das notwendige SDK dafür wird bereits an Entwickler verteilt damit diese Funktionen implementiert werden können. CSR, CSRE, GT2, PWTS, GT3V2: Diese Lenkräder sind kompatibel wenn die Firmware 750+ installiert ist. CSW: Voll unterstützt! (alle FW Versionen) Beispiel: Codemasters hat bereits ein Update für F1 2012 auf dem PC veröffentlicht welches diese zusätzlichen Funktionen freischaltet. Alternativ kann ein kostenloses Programm wie "Fanaleds" oder "SLIMax Manager" verwendet werden um diese Funktionen in vielen anderen Spielen zugänglich zu machen: www.fanaleds.com // www.eksimracing.com -> Wenn ein Spiel nativ das Fanatec SDK verwendet werden die Signale von Zusatzprogrammen (wie Fanaleds) deaktiviert. Tous les jeux PC peuvent utiliser les fonctionnalités avancées de nos volants Fanatec (affichage, vibrations, rev LEDs) et les vibrations ABS (pédales CSP) mais les développeurs doivent implémenter ces fonctionnalités dans le jeu. Nous sommes en train d'éditer le SDK (kit de développement logiciel) (Octobre 2012) grâce auquel les développeurs pourront implémenter ce qu’ils désirent. CSR, CSRE, GT2, PWTS, GT3V2: Entièrement pris en charge à l'aide du firmware 750 + CSW: Entièrement pris en charge (tous les firmwares) Un bel exemple: Codemasters vient de mettre à jour F1 2012 sur PC afin d’utiliser directement le SDK sans aucune modification nécessaire. Sinon, vous pouvez utiliser Fanaleds ou SLIMax Manager pour activer ces fonctionnalités dans de nombreux jeux: www.fanaleds.com // www.eksimracing.com -> Si un jeu dispose du support SDK, il remplacera l'utilisation de tout autre outil comme Fanaleds. もし ClubSport Wheel (CSW)のセンターがインゲームのステアリングと一致しない場合や、ファームウェアーフラッシュを行った場合センター合わせを実行する必要があります。以下の手順に従いセンター合わせを行ってください。 1. 電源ON 2. tuning menuを開く (bpressing the tuning menu ボタンを押してください。) 3. wheelを中心に合わせた状態にしてください。 4. 両方のジョイスチックボタンを同時に押してください。. 二回おしても問題ありません。 5. CSW wheel センターが driver menu (best option)に一致しているかまたはゲーム内wheelと一致しているか。 Please note that in-game-wheel とgaming wheel はwheelを回転している状態では必ずしも一致しませんがこれは問題ではありません。これはドライバー設定または、ゲーム自体がangle/sensitivityといったパラメターを変更するためです。GT5等いくつかのゲームはゲームコントローラの900° 回転を入力としてサポートするにもかかわらず900° 回転をアニメーションをサポートしません。これは非常にミスリーディングです。以下のビデオで上記手順を確認できます。 Open in a new window
+ Should I use gloves to drive my Fanatec Wheel	We are asked very often, if gloves should be used on our wheels to keep them in good condition. T... We are asked very often, if gloves should be used on our wheels to keep them in good condition. The question cannot answered that easily. In general, gloves can help to keep the wheel clean and protect it sweat. But on the other hand, gloves can increase the wear of the wheel rim material (leather, strands etc.), to a much higher level than bare hands would do. This additional wear cannot be covered by warranty. Testing capabilities are limited and it is impossible to test all types/brands of gloves, to make recommendations. Because of this and the possibly increased wear & tear, Fanatec cannot give a general recommendation to use gloves. Wir werden sehr oft gefragt, ob man bei der Benutzung unserer Lenkräder Handschuhe tragen soll, um sie in gutem Zustand zu halten. Grundsätzlich können Handschuhe das Lenkrad von Schweiß und Verunreinigungen schützen, allerdings können sie den Verschleiß der Materialen extrem erhöhen, welcher nicht von der Garantie abgedeckt werden kann. Die Möglichkeiten solche Auswirkungen zu testen sind begrenzt, weswegen es nicht möglich ist, alle Handschuhe unterschiedlicher Art, von verschiedenen Herstellern, zu testen. Dementsprechend können keine konkreten Empfehlungen gegeben werden. Aufgrund der Möglichkeit, dass erhöhte Abnutzung und zusätzlicher Verschleiß auftreten kann, können wir keine grundsätzliche Empfehlung zur Verwendung von Handschuhen aussprechen. Tous les jeux PC peuvent utiliser les fonctionnalités avancées de nos volants Fanatec (affichage, vibrations, rev LEDs) et les vibrations ABS (pédales CSP) mais les développeurs doivent implémenter ces fonctionnalités dans le jeu. Nous sommes en train d'éditer le SDK (kit de développement logiciel) (Octobre 2012) grâce auquel les développeurs pourront implémenter ce qu’ils désirent. CSR, CSRE, GT2, PWTS, GT3V2: Entièrement pris en charge à l'aide du firmware 750 + CSW: Entièrement pris en charge (tous les firmwares) Un bel exemple: Codemasters vient de mettre à jour F1 2012 sur PC afin d’utiliser directement le SDK sans aucune modification nécessaire. Sinon, vous pouvez utiliser Fanaleds ou SLIMax Manager pour activer ces fonctionnalités dans de nombreux jeux: www.fanaleds.com // www.eksimracing.com -> Si un jeu dispose du support SDK, il remplacera l'utilisation de tout autre outil comme Fanaleds. もし ClubSport Wheel (CSW)のセンターがインゲームのステアリングと一致しない場合や、ファームウェアーフラッシュを行った場合センター合わせを実行する必要があります。以下の手順に従いセンター合わせを行ってください。 1. 電源ON 2. tuning menuを開く (bpressing the tuning menu ボタンを押してください。) 3. wheelを中心に合わせた状態にしてください。 4. 両方のジョイスチックボタンを同時に押してください。. 二回おしても問題ありません。 5. CSW wheel センターが driver menu (best option)に一致しているかまたはゲーム内wheelと一致しているか。 Please note that in-game-wheel とgaming wheel はwheelを回転している状態では必ずしも一致しませんがこれは問題ではありません。これはドライバー設定または、ゲーム自体がangle/sensitivityといったパラメターを変更するためです。GT5等いくつかのゲームはゲームコントローラの900° 回転を入力としてサポートするにもかかわらず900° 回転をアニメーションをサポートしません。これは非常にミスリーディングです。以下のビデオで上記手順を確認できます。 Open in a new window
+ Fanatec SDK - What is it and how to get it?	What is the Fanatec SDK or what can you do with it? The fanatec SDK is... What is the Fanatec SDK or what can you do with it? The fanatec SDK is a package (VS based library) which lets programmers and developers use the extended features of our Fanatec Wheel and Pedal products. With use of the SDK code your game/software can ...make use of the additional wheel vibration/rumble motors (not the FFB motors) ...make use of the tuning display (for gear display, speeder, ...) ...make use of the vibration motors on ClubSport Pedals ...make use of the rev leds on ClubSport Wheel rims ...detect different Fanatec products if they have the same USB product ID (CSR or CSR Elite, etc.) ...detect the rim type connected to the ClubSport Wheel Base ...etc. Is the Fanatec SDK available for anybody? No, not in general. If you want to use the Fanatec SDK please contact our support team and mention what your plans are to use the SDK. After reviewing those plans you might receive a NDA which has to be signed before the SDK would be sent to you. What is not a function of the Fanatec SDK? The SDK is not necessary to get any output (pedal axis, steering wheel axis/rotation, button inputs) from our hardware. This is controlled by DirectInput only as our devices are HID standard devices. The SDK is not necessary to send force feedback effects to the wheel. For that you will only need to install the driver and to send standard direct input commands for FFB. So in gerneral all input/output and FFB features of our products do not need the SDK. It is only need for special Fanatec functions as mentioned on top of this article. In general we are not able to provide developer support how to read and control force feedback devices (which works 100% the same way for Fanatec hardware as for Logitech, Thrustmaster etc.). Please use Microsofts documentation. Here are some useful links to get you into the topic: DirectInput - Enumerating devices - https://msdn.microsoft.com/en-us/library/windows/desktop/bb153253(v=vs.85).aspx DirectInput - Capturing from Devices - https://msdn.microsoft.com/en-us/library/windows/desktop/bb153252(v=vs.85).aspx DirectInput - Using Force Feedback - https://msdn.microsoft.com/en-us/library/windows/desktop/bb153254(v=vs.85).aspx Wir werden sehr oft gefragt, ob man bei der Benutzung unserer Lenkräder Handschuhe tragen soll, um sie in gutem Zustand zu halten. Grundsätzlich können Handschuhe das Lenkrad von Schweiß und Verunreinigungen schützen, allerdings können sie den Verschleiß der Materialen extrem erhöhen, welcher nicht von der Garantie abgedeckt werden kann. Die Möglichkeiten solche Auswirkungen zu testen sind begrenzt, weswegen es nicht möglich ist, alle Handschuhe unterschiedlicher Art, von verschiedenen Herstellern, zu testen. Dementsprechend können keine konkreten Empfehlungen gegeben werden. Aufgrund der Möglichkeit, dass erhöhte Abnutzung und zusätzlicher Verschleiß auftreten kann, können wir keine grundsätzliche Empfehlung zur Verwendung von Handschuhen aussprechen. Tous les jeux PC peuvent utiliser les fonctionnalités avancées de nos volants Fanatec (affichage, vibrations, rev LEDs) et les vibrations ABS (pédales CSP) mais les développeurs doivent implémenter ces fonctionnalités dans le jeu. Nous sommes en train d'éditer le SDK (kit de développement logiciel) (Octobre 2012) grâce auquel les développeurs pourront implémenter ce qu’ils désirent. CSR, CSRE, GT2, PWTS, GT3V2: Entièrement pris en charge à l'aide du firmware 750 + CSW: Entièrement pris en charge (tous les firmwares) Un bel exemple: Codemasters vient de mettre à jour F1 2012 sur PC afin d’utiliser directement le SDK sans aucune modification nécessaire. Sinon, vous pouvez utiliser Fanaleds ou SLIMax Manager pour activer ces fonctionnalités dans de nombreux jeux: www.fanaleds.com // www.eksimracing.com -> Si un jeu dispose du support SDK, il remplacera l'utilisation de tout autre outil comme Fanaleds. もし ClubSport Wheel (CSW)のセンターがインゲームのステアリングと一致しない場合や、ファームウェアーフラッシュを行った場合センター合わせを実行する必要があります。以下の手順に従いセンター合わせを行ってください。 1. 電源ON 2. tuning menuを開く (bpressing the tuning menu ボタンを押してください。) 3. wheelを中心に合わせた状態にしてください。 4. 両方のジョイスチックボタンを同時に押してください。. 二回おしても問題ありません。 5. CSW wheel センターが driver menu (best option)に一致しているかまたはゲーム内wheelと一致しているか。 Please note that in-game-wheel とgaming wheel はwheelを回転している状態では必ずしも一致しませんがこれは問題ではありません。これはドライバー設定または、ゲーム自体がangle/sensitivityといったパラメターを変更するためです。GT5等いくつかのゲームはゲームコントローラの900° 回転を入力としてサポートするにもかかわらず900° 回転をアニメーションをサポートしません。これは非常にミスリーディングです。以下のビデオで上記手順を確認できます。 Open in a new window