TR5 Racing Simulator Cockpit Manual | Quick Start Guide | Fanatec

MANUAL | QUICK START GUIDE

TR5 Racing Simulator Cockpit

In this Guide

  1. A - GENERAL NOTES
    1. A1 - SYMBOL LEGEND
  3. B - PART LIST
  4. C - ASSEMBLY INSTRUCTIONS
  5. D - WARRANTY
  6. E - LEGAL

A - GENERAL NOTES

IMPORTANT: Since there are different versions of each product based on your region, please make sure you are using the correct set of instructions. The part number on the following page should match the numbers on your product packaging.
NOTE: Some screws and washers may be pre-installed. These are included in the parts list and will need to be loosened and reattached according to the instructions. Already pre-installed components are color-coded gray, while others are color-coded red, for example:

Color-coded gray - preinstalled

Color-coded red - supplied in the package separately

A1 - SYMBOL LEGEND

Recommended:
Two people for the task
Tighten the hardware
Keep the hardware loose for adjustments
Make the necessary adjustments
Break the tab off the corner bracket
Safety glasses required
Attention/Priority needed
Reserve for the next step
Mirrored components 
(same on both sides)

B - PART LIST

COMPONENTS

For installing steering &
gear shifter if needed

For installing steering &
gear shifter if needed

INCLUDED TOOLS

Cable tie

4 mm Hex key

5 mm Hex key

13 mm wrench

NOTE: Extra hardware may be included as spare parts.

 

 

C - ASSEMBLY INSTRUCTIONS

STEP 1

STEP 2

*NOTE Before inserting tube "E" into component "C" or "D", rotate it slowly to align the internal fittings at both ends. Insert only after proper alignment to avoid jamming or damage.

STEP 3

STEP 4

STEP 5

NOTE: Do not fully tighten the screws "AF".        

STEP 6

NOTE: Tighten all screws in this step.

STEP 7

STEP 8

STEP 9

NOTE: Do not fully tighten the screws "AD".          

STEP 10

NOTE: Tighten all screws in this step.

STEP 11

*NOTE: You can also use the Allen key to tighten the screws "AE" while you hold the nuts "AO" with your hand as shown.

2 Mounting options

STEP 12

4 Pedal plate mounting options

STEP 13

* Install the gear shift mount on either the left or right side according to personal needs.

STEP 14

NOTE: Do not fully tighten the screws "AI".

STEP 15

NOTE: Tighten all screws in this step.

STEP 16

STEP 17

NOTE: Attach the seat cover using hook-and-loop fasteners at an appropriate tightness to ensure a comfortable seating experience.
NOTE: Ensure that the smooth surface and the rubbing surface of fasteners fit tightly together without any gaps.

STEP 18

STEP 19

D - WARRANTY

The product warranty is provided by CORSAIR MEMORY, Inc. Refer to the terms & conditions of CORSAIR MEMORY, Inc. on trakracer.com

E - LEGAL

©2026 CORSAIR MEMORY, Inc. Trademarks belong to their respective owners. All rights reserved. Trak Racer is a brand of CORSAIR MEMORY Inc.